Specifications

Administrator's Manual 18. Dialing Settings
Version 2.0.0 111 October 2012
Parameter Description
voip/regional_settings/call_progres
s_tones/%d/frequency_a_level
Output level of the low frequency tone (in -dBm) in Call
Progress generation.
The valid range is 0 to 63, where 63 is mute.
voip/regional_settings/call_progres
s_tones/%d/frequency_b_level
Output level of the low frequency tone (in -dBm) in Call
Progress generation.
The valid range is 0 to 63, where 63 is mute.
voip/regional_settings/call_progres
s_tones/%d/tone_on_0
tone_on_0 to tone_on_3.
If the signal is Cadence or Burst, then this value
represents the on duration. If a Continuous tone, then
this value represents the minimum detection time. The
units are in 10 msec.
The valid range is 0 to 10000.
voip/regional_settings/call_progres
s_tones/%d/tone_off_0
tone_off_0 to tone_on_3.
If the signal is Cadence, then this value represents the
off duration. The units are in 10 msec. If it is not used,
then set it to zero. If the signal is Burst, only tone_off 0 is
relevant. It represents the off time that is required from
the end of the signal to the detection time.
The valid range is 0 to 10000.