Specifications
310HD, 320HD and 420HD IP Phones
Using the Configuration File:
Table 18-4: Regional Parameters
Parameter Description
Current Location
[voip/regional_settings/selected_co
untry]
Defines the country in which your phone is located. The
behavior and parameters of analog telephones lines vary
between countries. The set of Call Progress Tones are
all location-specific. The phone automatically selects the
correct regional settings according to this setting.
Supported countries:
[Israel] Israel
[China] China
[France] France
[Germany] Germany
[Netherlands] Netherlands
[UK] UK
[Brazil] Brazil
[Italy] Italy
[Argentina] Argentina
[Portugal] Portugal
[Russia] Russia
[Australia] Australia
[USA] USA
voip/regional_settings/use_config_f
ile_values
Enables the user-defined CPT. When this parameter is
enabled, the selected_country parameter is not relevant
and the below Call Progress Tones values can be
determined by the user.
[0] - Disable (default)
[1] - Enable
Call Progress Tones (CPT)
Note: Up to 10 CPT’s can be configured (voip/regional_settings/call_progress_tones/0…9).
voip/regional_settings/call_progres
s_tones/%d/enabled
Enables the specific CPT.
[0] - Disable
[1] - Enable
Defines the name of the CPT.
voip/regional_settings/call_progres
s_tones/%d/name
voip/regional_settings/call_progres
s_tones/%d/cadence
Defines the cadence type of the tone.
[0] - Continuous signal
[1] - Cadence signal
[2] - Burst signal
voip/regional_settings/call_progres
s_tones/%d/frequency_a
Defines the low frequency (in Hz) of the tone.
The valid value range is 300 to 1980 Hz, in steps of 1 Hz.
Unused frequencies must be set to zero.
voip/regional_settings/call_progres
s_tones/%d/frequency_b
Defines the high frequency (in Hz) of the tone.
The valid value range is 300 to 3000 Hz, in steps of 1 Hz.
Unused frequencies must be set to zero.
Administrator's Manual 110 Document #: LTRT-09910