Specifications

310HD, 320HD and 420HD IP Phones
Administrator's Manual 106 Document #: LTRT-09910
Parameter Description
Secondary Dial Tone
[voip/dialing/secondary_dial_tone/enabled]
Enables the secondary dial tone.
 [0] Disable - Phone doesn't use secondary
dial tone.
 [1] Enable (default) - Phone plays secondary
dial tone if the secondary dial tone key is
pressed (first digit).
Secondary Dial Tone Key
[voip/dialing/secondary_dial_tone/key_seq
uence]
Defines the secondary dial tone is played if this is
the first key pressed.
The valid range is 0 to 9. The default value is 9.
Note: This parameter is available only if the
parameter
voip/dialing/secondary_dial_tone/enabled is
set to 1.
Out of Service Behavior
[voip/services/out_of_service_behavior]
Determines whether a reorder tone is played
instead of a dial tone if you configured a
Registrar IP address and the registration failed.
 [NONE] No Tone
 [REORDER_TONE] Reorder Tone (default)
Stutter Tone Duration
[voip/services/msg_waiting/stutter_tone_d
uration]
Defines the duration for which a stutter tone is
played when you have unheard messages.
The valid range is 1000 to 60000.
The default value is 2500.
Automatic Disconnect
[voip/dialing/automatic_disconnect]
Determines whether the phone automatically
goes idle (i.e. on-hook) when the last remaining
call is disconnected. This is only relevant when
the speaker or headset is used.
 [0] Disable
 [1] Enable(default)