Specifications

Administrator's Manual 18. Dialing Settings
18.2 Tones
Tones settings can be configured using the Web or Configuration File, as described below.
 To configure the dial tones:
 Using the Web:
1. Access the ‘Dialing’ page (Configuration tab > Voice Over IP menu > Dialing).
Figure 18-2: Tones Web Fields in Dialing Page
2. Access the ‘Services’ page (Configuration tab > Voice Over IP menu >
Services).
Figure 18-3: Tones Web Fields in Services Page
3. Configure Tones options according to the parameters in the table below, and then
click Submit.
 Using the Configuration File:
Table 18-2: Dial Tones Parameters
Parameter Description
Dial Tone Timeout
[voip/dialing/dialtone_timeout]
Defines the maximum duration of the dial tone (in
seconds) after which the dial tone stops and a
reorder tone is played.
The valid range is 1 to 300. The default value is
30.
Reorder Tone Timeout
[voip/dialing/warning_tone_timeout]
Defines the maximum duration of the reorder
tone (in seconds) after which the reorder tone
stops and a howler tone is played.
The valid range is 1 to 300. The default value is
40.
Howler Tone Timeout
[voip/dialing/offhook_tone_timeout]
Defines the duration (in seconds) of the howler
tone. If the limit is exceeded, the howler tone
stops. The howler tone indicates that the phone
has been left in an off-hook state.
The valid range is 1 to 300. The default value is
120.
Version 2.0.0 105 October 2012