Specifications

310HD, 320HD and 420HD IP Phones
17.5 Configuring SIP Reject Code
Reject Code can be configured using the Web or Configuration File, as described below.
 To configure Reject Code:
 Using the Web:
1. Access the ‘Services’ page (Configuration tab > Voice Over IP menu >
Services > General Parameters).
Figure 17-6: Reject Code Web Field
2. Configure the Reject Code parameters according to the table below, and then
click Submit.
 Using the Configuration File:
Table 17-6: Reject Code Parameter
Parameter Description
/voip/services/reject_code
Configures the reject code that the IP Phone will send when
pressing the Reject softkey or while DND is activated.
Valid values are:
[CODE_603]
[CODE_486]
Administrator's Manual 102 Document #: LTRT-09910