User`s manual

310HD IP Phone
User's Manual 28 Document #: LTRT-24703
4.2 Configuring Speed Dialing
Speed dialing allows you to quickly place a call by simply pressing a speed dial key that has been
assigned with a phone number. You can assign up to 10 speed dial numbers. You can either
assign a contact in your directory to a speed dial key or manually assign a phone number to a
speed dial key). For placing calls using speed dial keys, see Section 6.2 on page 52.
4.2.1 Assigning Speed Dials
Your phone’s speed dial keys are labeled M1 to M10. To assign these keys a phone number,
follow the procedure below.
Note: Speed Dial keys are typically defined by directly accessing the Speed Dial
screen, as described in this section. However, you can also press a Speed Dial
key not yet assigned. Once pressed, the Speed Dial screen is accessed and you
can continue from Step 2 in the procedure below to assign a phone number to
the key.
 To assign a phone number to a speed dial key:
1. From the idle screen, press the MENU key, and then select the Speed Dial menu.
The speed dial entries are displayed. Undefined speed dial key are displayed with “N/A”, as
shown below:
2. Select a Speed Dial memory key, using the
and Navigation keys, to which you want to
assign the speed dial number, and then press the ENTER key. Indices “1” to “10” correspond
to the phone’s speed dial keys M1 to M10, respectively. The following screen appears for
entering the phone number: