Specifications

Administrator's Manual 6. Configuration File Parameters
Version 1.0.2 83 October 2009
6.3 Speed Dials and Phone Contacts
Table 6-9: Speed Dials and Phone Contacts Configuration File Parameters
Parameter Description
Speed Dial
[SPEED_0]
You can add up to 10 speed dials to your phone. The format and syntax of
this parameter is as follows (example):
[SPEED_0]
111 0
[SPEED_1]
222 0
[SPEED_2]
333 0
Note: Currently, the second parameter must be set to 0.
Phone Directory Contacts
[CONTACT]
Defines the phone’s contacts, which can be a telephone number, an IP
address, or a domain name. The format and syntax of this parameter is as
follows (example):
[CONTACT]
Peter;343;
Susan;121;
Lee;232;10.16.2.19
Notes:
 The contact’s name is entered first followed by a semi-colon, and then the
phone number and domain (optional). If both phone number and domain
are defined, they must be separated by a semi-colon.
 Each contact entry must end with a semi-colon, unless a domain appears
at the end of the entry.
6.4 Regional Settings
Table 6-10: Regional Settings Configuration File Parameters
Parameter Description
voip/regional_settings/s
elected_country
Defines the country in which your phone is located. The behavior and
parameters of analog telephones lines vary between countries. The set of Call
Progress Tones are all location-specific. The phone automatically selects the
correct regional settings according to this setting.
Supported Countries:
 "Israel"
 "China"
 "France"
 "Germany"
 "Netherlands"
 "UK"
 "Brazil"
 "Italy"
 "Argentina"