Specifications

Administrator's Manual 4. Web-based Management
Version 1.0.2 55 October 2009
4. To enable three-way conferencing, select “Local” to allow the phone to handle three-way
conferencing locally.
5. To configure Message Waiting Indication, perform the following:
a. From the ‘Activate’ drop-down list, select “Enable”.
b. In the ‘Voice Mail Number’ field, enter the extension number to access your voice mail.
c. If you need to register with a MWI subscriber server, then from the ‘Subscribe to MWI’
drop-down list, select “Enable”, and configure the following parameters:
♦ MWI Server IP Address or Host Name: IP address or host name of the MWI
server
♦ MWI Server Port: port number of the MWI server
♦ MWI Subscribe Expiry Time: interval between registrations
6. Under the General Parameters group, configure the following parameters:
• Stutter Tone Duration: This tone is used in the following scenarios:
♦ When you enable MWI and an unheard message exists, a stutter tone is played for
the duration configured for this parameter.
♦ When call forwarding is activated, a stutter tone is played for the duration
configured for this parameter.
• Out of Service Behavior: defines the tone to play instead of a dial tone if you
configured a Registrar IP address and the registration failed:
♦ Reorder Tone: a Reorder tone is played instead of a dial tone.
♦ No Tone: no tone is played.
• Automatic Disconnect: When the remote side disconnects and this was the last call
session, the phone automatically disconnects when using the SPEAKER or HEADSET.
7. Click Submit.