Specifications

Administrator's Manual 4. Web-based Management
Version 1.0.2 53 October 2009
4.6.5 Configuring Line Settings
Before you can make a call on your phone, you must configure a phone line.
¾ To define the lines:
1. Access the ‘Line Settings’ page (Configuration tab > Voice Over IP menu > Line
Settings).
Figure 4-12: Voice Page
2. To enable a Line, perform the following:
a. From the ‘Line Activate’ drop-down list, select “Enable”; additional fields appear.
b. In the ’User ID’ field, enter this lines VoIP user’s ID used for identification to initiate and
accept calls.
c. In the ‘Display Name’ field, enter a name to intuitively identify the line and that is
displayed to remote parties as your caller ID.
3. For configuring username and password authentication, perform the following:
a. In the ‘Authentication User Name’ field, enter the user name provided to you from the
VoIP Service Provider. This is used when sending a response to Unauthorized or Proxy
Authentication Requested (401/407).
b. In the ‘Authentication Password’ field, enter the password provided to you from the VoIP
Service Provider. This is used when sending a response to Unauthorized or Proxy
Authentication Requested (401/407).
4. Click Submit.