Specifications

Administrator's Manual 3. Menu-Driven, Display Screen-Based Management
Version 1.0.2 33 October 2009
3.4.1 Network Settings
The phone’s LAN connection interface can be either manually defined (static IP address) or
automatically configured using a DHCP server from where the LAN IP address is obtained.
¾ To configure the phone’s LAN connection type:
1. Access the Network Settings submenu (MENU key > Administration menu > Network
Settings).
2. Using the Navigation keys, choose one of the following IP addressing schemes:
• Static IP
• Automatic IP
3. Press the ENTER key.
4. If you selected “Static IP” in Step 2, perform the following (otherwise, skip to Step 5):
a. Press the ENTER key.
b. For each required network parameter (IP Address, Netmask, Gateway, Primary DNS,
Secondary DNS), press the ENTER key.
c. Enter the new address in dotted-decimal notation.
♦ Left/Right Navigation keys: moves the cursor left or right in the IP address.
5. After all parameters are configured press the left navigation key and save the settings.
3.4.2 SIP Accounts
The SIP Accounts submenu allows you to configure parameters related to the phone’s SIP
account.
Note: Currently, the SIP Proxy server’s IP address cannot be configured using the
LCD screen interface. However, you can configure it using the Web interface
(refer to Section 4.6.1 on page 45).
¾ To configure the phone’s SIP account:
1. Access the SIP Accounts submenu (MENU key > Administration menu > SIP Accounts).
2. Select (using the Navigation keys), one of the following SIP proxy parameters:
• SIP Proxy Address: SIP proxy server’s address (currently, this parameter is not
supported)
• User ID
• Display Name
• Authentication Name
• Authentication Password
3. Press the ENTER key.
4. Enter the required values, and then press the ENTER key.