Specifications

310HD IP Phone

Administrator's Manual 32 Document #: 299-13801

¾ To activate call forwarding:

1. When the phone is in on-hook state, press the FORWARD function key; a dial tone is

played.

2. Dial the number to where you want to forward the incoming call; the phone’s display screen

displays a message indicating that the call has been successful forwarded.

3. To deactivate call forward, press again on the FORWARD key.

3.3.6 Date and Time

The phone’s LCD screen allows you to manually define the date and time. By default, the phone

retrieves the date and time from a Network Time Protocol (NTP) server over the Internet.

Therefore, before you can set the date and time manually, you need to disable NTP in the Web

interface (refer to Section 4.7.1 on pag

e 56).

¾ To manually define the date and time:

1. Access the Date and Time submenu (MENU key > Phone Settings menu > Date and

Time).

2. Edit the following options (using the Navigation keys):

• Date: enter the date in the following format: MMDDYYYY

• Time: enter the time in the following format: HHMMSS

3.4 Administration

The Administration menu allows you to perform the following advanced settings:

 Network Settings (refer to Section 3.4.1 on pag

e 33)

 SIP accounts (refer to Section 3.4.2 on p

age 33)

 Restoring factory defaults (refer to Section 3.4.3 on p

age 34)

 Restarting the phone (refer to Section 3.4.4 on page 34)

Note: You need a login password when you initially access the submenus of the

Administration menu. When you are prompted for the password, you can enter

the default password “1234”, and then press the ENTER key. To change the

62).