Specifications

310HD IP Phone
Administrator's Manual 30 Document #: 299-13801
3.3.2 Speed Dialing
You can add up to 10 speed dial numbers, whereby each entry is associated with a Speed Dial
key. To make a call using the speed dial feature, all you need to do is to press the required
Speed Dial key (instead of dialing the number manually from the keypad).
¾ To add a speed dial entry:
1. Access the Speed Dial submenu (MENU key > Phone Settings menu > Speed Dial).
2. Select a Speed Dial memory key to which you want to assign the speed dial number. Note
that indices “1” to “10” represent M1 to M10 Speed Dial keys on the phone, respectively.
3. Press the ENTER key.
Note: Instead of performing steps 1 through 3, you can configure a Speed Dial key by
pressing one of the phone’s Speed Dial keys, and then continuing with Step 4.
4. In the ‘Number’ field, enter the phone number that you want to assign a speed dial.
5. Press the ENTER key to save your settings.
¾ To edit or delete a speed dial:
1. In the Speed Dial list, select the speed dial entry that you want to edit.
2. Press the ENTER key and at the flashing prompt enter a new number.
3. Press the ENTER key to save your settings.
¾ To delete a speed dial:
1. In the Speed Dial list, select the speed dial entry that you want to edit.
2. Press the ENTER key and at the flashing prompt press the ENTER key again. The Speed
Dial list is displayed and the selected Speed Dial entry displays N/A instead of the previous
number. The Speed Dial Entry is now available to use a new number.
3.3.3 Ring Tone
The phone provides you a default list of ring tones from which you can choose a ring tone for
indicating incoming calls.
Note: You can upload additional ring tones for your phone, using the Web interface
(refer to 4.4.3 on page 42).
¾ To select a ring tone:
1. Access the Ring Tone submenu (MENU key > Phone Settings menu > Ring Tone).
2. Select the desired ring tone (using the up/down Navigation keys).
3. Press the ENTER key to assign the selected ring tone. An asterisk is displayed to the left of
the ring tone name.
4. Press ENTER again and a confirmation message is displayed. Use the Left/Right Navigation
keys to select either Yes to save the settings or No to discard the settings.