DUB100 DUB200 DUB500 STAMPED bASKETS www.audiobahninc.
The Audiobahn Way To bring the product to market that excites the consumer through sound and vision from an orientation of integrity and customer service. We make you look as good as you sound. We strive to take car audio to an extreme the world has never seen, and a world that never stops evolving.
onsumer y and d. We strive to nd a world rm goal in Introduction Dear Customer, Congratulations on your purchase of the worlds finest brand of car audio products. Here at DUB audio we are devoted to making our musical reproduction the very best, and we are pleased you have chosen our product. Through years of engineering expertise, hand craftsmanship, and critical testing procedures, we have created a wide range of products that reproduce music with all the clarity and richness you deserve.
Table of Contents Introduction Getting Started Woofer Introduction Woofer Features Theile / Small Parameters Box Parameters Graphical Response Curves Enclosure and Setup Troubleshooting Warning and Disclaimer Warranty 01 02 03 04-05 06 07 08-10 11 12 13 14-15 Getting Started Welcome to DUB audio This manual has been designed to provide information for the owner, salesperson, and installer.
Woofer Introduction Audiobahn woofers are a low frequency driver designed primarily for use in small sealed or vented enclosures depending on the model of sub. Please check the specifications in this manual, our website at www.audiobahninc.com , or call us at 714-988-0400 or 800-488-8595. As specifications and parameters are subject to change, we highly advise always checking our web site or calling us for the most current information.
Woofer Features 2 inch Rubber Surround The 2 inch rubber surround provides the consistent support necessary for the linear motion of the speaker cone. In addition, the inherent damping capabilities eliminates the transmission of sonic disturbances between the cone and the frame of the speaker. This greatly improves the clarity of the speakers frequency response. Flat Spider The speakers linear compliance is balanced through the use of a flat spider design.
pport In he and the y of the he use ical Linear ved ortion Woofer Features Aluminum Voice Coil The voice coil former is black, anodized aluminum for highly efficient thermal transfer. This allows winding high temperature copper wire in multiple layers for improved efficiency. This allows for improved power handling by effectively dissipating heat. Extended Pole The pole piece has been extended to provide a more linear magnetic field for the operation of the woofer.
06 DUB100 DUB200 DUB500 Depth Hole Diamater Displacement EBP 39 5 1/4" 9 1/8" 10" 0.12 Cu. Ft. 6 3/8" 10 7/8" 12 1/8" 0.23 Cu.Ft. Dimensions 42 7 1/8" 13 5/8" 15 1/8" 0.38 Cu.Ft. 39 An EBP of less then 45 is SUGGESTED for only a sealed box and greater then 65 for a ported box. Vas does not represent the volume of a Box. Vas is just a parameter used when calculating a box. 29.7Hz 32 Hz 38 Hz Fs 0.64 0.72 0.74 Qts 0.77 0.83 0.92 Qes 3.79 5.397 3.923 Qms 86.5 Liters 63.99 Liters 24.
Box Parameters DUB Box Specifications All ports listed are circle ports unless otherwise stated. Surface area of a circle port = (3.14) X (radius) (squared) Remember to build your box to the total volume, not just air space, as total volume includes all displacement. Model # DUB100 DUB200 DUB500 Space Saver Bass Design Ported Air Space (Cu. Ft.) Port Size (Inches) Port Vel. (%) -3dB (Hz) Tune Freq. (Hz) Sub Disp. (Cu. Ft.) Port Disp.(Cu. Ft.) Total Vol. (Cu. Ft.) 0.7 2 x 6.5 3.2 38 41 0.12 0.01 0.
DUB100 Curves 08
DUB200 Curves WWW.DUBSERIES.
DUB500 Curves 10
Enclosure and Setup Building an Enclosure To work properly, the walls of the enclosure must be rigid and not flex when subjected to high pressure generated by the speaker's operation. For optimum performance, we recommend using 3/4" MDF (Medium Density Fiberboard) and internal bracing. The enclosure should be glued together along with support of screws or nails. Because MDF is porous, it is suggested that you seal the outside with polyurethane prior to painting or carpeting.
Troubleshooting If you start having problems with distorted sound or loss performance after installing your subs, you can follow the instructions below to try and locate what is causing the problem. 1) If you have any distorted sound, loss of performance, or rattling from your subs, check the connections running from your amplifier or other processor to the box. You will also want to check the connections inside the box to make sure no wires have become unhooked or are loose.
orted g your w to . ss of check er or want to ake sure ose. oblem, f there y loss can tortion. move ads or mell going for he the box, sors ce to ng Warning and Disclaimer WARNING Investigate the layout of your automobile thoroughly before drilling or cutting any holes to the automobile. Take much care when you work near or around the gas lines, hydraulic lines, and electrical wiring.
Warranty Audiobahn Consumer Product Warranty Policy Audiobahn products are manufactured with the highest quality components and some of the most advanced technology available. Because of this, we recommend that you have your new products installed by an Authorized Audiobahn Dealer.(A list of Authorized Audiobahn Dealers can be found on our web page). Warranty Period: One year from the original date of purchase. Warranty Coverage: This warranty covers manufacturer defects only.
Warranty Cont ality ailable. ducts horized ase. fects only. s nonAudiobahn date of iobahn Dealer ries efective re enclosure, prior enclosure). at the time of How to receive warranty service: Contact your local Authorized DUB audio Dealer, or call audiobahn at (800) 488-8595 between the hours of 9:00 AM and 5:00 PM PST.
