Owner`s manual

Mounting and Setup

Hole to line up when

replacing plug or tweeter

2-Way Tweeter Option

When using one of the AS series 2-way speakers, the tweeter is fully removable. When

removing the tweeter, make sure to replace the chrome plug in its place. This is needed

for proper operation of the speaker. To remove the plug or tweeter grip your ngers on

the outside of the tweeter or plug and gently pull up with a tilting action slightly from side

to side and it will pop out. To replace the plug or tweeter, line up the holes at the bottom

of the plug or tweeter with the marking on the cup on the speaker.

When using the tweeter installed in the speaker or mounting separately., the blue wire

with the black line is -(negative) and the solid blue wire is +(positive).