Specifications

In the event that your Audiobahn speakers appear to require service we ask that you first do a little trouble
shooting to determine if the problem is actually the speaker, or a problem located in a different part of the vehicle
such as the amplifier, wiring, fusing or possibly the source unit.
If your Audiobahn speakers have been installed professionally by an authorized Audiobahn Dealer, we
recom
mend that you return to the dealer and demonstrate the problem to a qualified installer or repair technician.
If you installed the speaker yourself, use the following guidelines to help find the problem.
� 1) No Sound
� � *Check the source or amplifier for power and be sure they are operating properly
� � *Check all signal Connections
� � *Check for any wiring that may be shorting together or touching the me
tal chassis
� � *Check all ground connections
� 2) Distorted Sound at All Volumes
� � *Check for bad speaker connections
� � *Check wiring for correct polarity
� 3) Distorted Sound at High Volumes Only
� � *Check for loose mounting of the speaker
� � *Inspect the speaker for debris in the cone or other obstructions
� � *Check the woofer cone for any damage or defects
� 4) Poor Bass Response
� � *Check wiring for correct polarity
� � *Check for unstable or loose mounting surface
� � *Check bass & treble controls as the source unit or amplifier
� 5) Poor High Frequency Response
� � *Check wiring for correct polarity
� � *Check treble control or EQ settings
� � *Check the tweeter for possible damage
Troubleshooting
11
Investigate the layout of your automobile thoroughly before drilling or cutting any holes.
Take care when you work near the gas tanks,gas lines, hydraulic lines, and electrical wiring.
Do not use the power amplifier unmounted. Attach the system securely to the automobile
to prevent damage, particularly in the event of an accident. Do not mount the system
so that the wire connections are unprotecte
d or are subject to pinching or damage
f
rom nearby objects.
The +12V DC power wire must be fused at the battery positive terminal connection.
Before making or breaking power connections at the system power terminals,
disconnect the +12V wire at the battery end. Confirm your radio/head unit and/or other
equiptment is turned off while connecting the input jacks and speaker terminals.
If you need to re
place the power fuse, replace it only with a fuse identical to that
s
upplied with the system. Using a fuse of different type or rating may result in damage to
this system which is not covered by the warranty.
Disclaimer
Specifications are subject to change with out notice.
For the most updated Specifications call Audiobahn,
your local Authorized Audiobahn Dealer,
or check
the Audiobahn website.
www.audiobahninc.com
Warning / Disclaimer
Technical Assistance(800)488-8595 /[e-mail]
12
WARNING