QUALITY, RLIABILITY, & PURE BLISS DIGITAL CYLINDER CAPACITORS ACAP7P / ACAP3P OPERATING INTSTRUCTIONS PLEASE RETAIN MANUAL FOR FUTRE USE AND REFERENCE
The Audiobahn Way To bring the product to market that excites the consumer through sound and vision from an orientation of integrity and customer service. We make you look as good as you sound. We strive to take car audio to an extreme the world has never seen, and a world that never stops evolving.
Table of Contents Table of Contents INTRODUCTION 3 CAPACITOR INTRODUCTION 4 SPECIFICATIONS 5 CHARGING / DISCHARGING 6 MOUNTING AND INSTALLATION 6 ADJUSTMENTS AND TROUBLESHOOTING 8 WARNING / DISCLAIMER 9 WARRANTY 10-11 2
Introduction Dear Customer, Congratulations on your purchase of the worlds finest brand of car audio products. Here at Audiobahn Inc. we are devoted to making our musical reproduction the very best, and we are pleased you have chosen our product. Through years of engineering expertise, hand craftsmanship, and critical testing procedures, we have created a wide range of products that reproduce music with all the clarity and richness you deserve.
Capacitor Introduction When installed properly, your new stiffening capacitor will provide years of dependable service. There are many benefits of adding a stiffening capacitor. The most significant benefit is the capacitors ability to improve bass performance in your sound system. This is possible due to the voltage stabilizing effects of the capacitor. When an audio system needs to deliver an instantaneous bass peak, the vehicle's electrical system often cannot provide enough power.
Specifications Capacitance ACAP7P / ACAP3P------------------------------------------------------------1,000,000 microfarads (1 Farad) Working Voltage ACAP7P---------------------------------------------------------------------------24V ACAP3P---------------------------------------------------------------------------20V Surge Voltage ACAP7P---------------------------------------------------------------------------30V ACAP3P---------------------------------------------------------------------------24V E.S.R.
Charging WARNING!!! Before making or breaking any electrical connections, please make sure to read the following instructions on how to properly charge and discharge the capacitor. Not following the charge / discharge instructions can lead to permanent damage to the capacitor, which is not covered under the manufacturer warranty. Charging After mounting the capacitor in its final position, attach the ground to the capacitor and the chassis grounding location.
Discharging Discharging If you plan to store your vehicle or plan on not using the system for a long period of time, we suggest to remove the capacitor. Anytime you disconnect the capacitor's power wire from the battery, you need to properly discharge the capacitor. This is done by using the same supplied bulb as you used for charging the capacitor. Take the bulb and place the ends across the negative (-) and positive (+) terminals of the capacitor.
Installation and Mounting For maximum performance, the capacitor should be installed as close to your amplifier(s) as possible. The ideal location is one which allows for short wiring runs while keeping the capacitors somewhat isolated from the heat created by the amplifier system. The positive (+) power wire should be kept as short as possible and be connected to the amplifier's battery supply input.
Troubleshooting Should you encounter a problem with your capacitor, you can follow the steps below to make sure that it is working properly. 1. Follow all power (+) and ground (-) connections to and from the capacitor. Make sure there are no kinks in the wire and no cuts either. If there is a problem in the wiring, make sure to use new wire and place the wire in a good location where it will not be roughed up and abused. 2.
Technical Assistance(800)488-8595 /tech@audiobahninc.com Warning / Disclaimer WARNING Investigate the layout of your automobile thoroughly before drilling or cutting any holes. Take care when you work near the gas tanks, gas lines, hydraulic lines, and electrical wiring. Do not use the power amplifier unmounted. Attach the system securely to the automobile to prevent damage, particularly in the event of an accident.
Technical Assistance (800)488-8595 /tech@audiobahninc.com Warranty Audiobahn Consumer Product Warranty Policy Audiobahn products are manufactured with the highest quality components and some of the most advanced technology available. Because of this, we recommend that you have your new products installed by an Authorized Audiobahn Dealer.(A list of Authorized Audiobahn Dealers can be found on our web page). Warranty Period: One year from the original date of purchase.
4ECHNICAL !SSISTANCE TECH AUDIOBAHNINC COM Warranty Continued How to receive warranty service: Contact your local Authorized Audiobahn Dealer, or call Audiobahn at (800) 488-8595 between the hours of 9:00 AM and 5:00 PM PST. If you are having problems with your system, we recommend you check the product carefully and thoroughly to confirm that the product truly has a manufacturer defect; as opposed to abuse, or other components in the system causing the failure.
