Specifications

Wiring and Controls

� From left to right you have three sets of terminals. The left terminal in each set

is negative (-) and the right terminal is positive (+). (1) is the input terminals. This is the

speaker wire coming from your amplifier or source unit. (2) is the tweeter output. This is

the speaker wire going to the tweeter. (3) is the midwoofer output. This is the speaker

wire going to the midwoofer.

� (4) is the

tweeter gain switch. This allows you to adjust the gain of your

tweeter. It allows you to switch between 0dB and -3dB. Setting the switch in the left

position (5) sets it at 0dB, and setting the switch in the right position (6) sets it at -3dB.

1 2 3