QUALITY, RLIABILITY, & PURE BLISS DUAL SUB PORTED SYSTEM ABB102V / ABB122V OPERATING INTSTRUCTIONS PLEASE RETAIN MANUAL FOR FUTRE USE AND REFERENCE
The Audiobahn Way To bring the product to market that excites the consumer through sound and vision from an orientation of integrity and customer service. We make you look as good as you sound. We strive to take car audio to an extreme the world has never seen, and a world that never stops evolving.
Introduction Dear Customer, Congratulations on your purchase of the worlds finest brand of car audio products. Here at Audiobahn Inc. we are devoted to making our musical reproduction the vert best, and we are pleased you have chosen our product. Through years of engineering expertise, hand craftsmanship, and critical testing procedures, we have created a wide range of products that reproduce music with all the clarity and richness you deserve.
Features and Specifications ABB122V Dual 12" Ported Bass System ABB102V Dual 10" Ported Bass System High Quality MDF Construction High Quality MDF Construction Black Carpeted Covering Black Carpeted Covering Extended Low Frequency Slotted Ports Extended Low Frequency Slotted Ports Audiobahn Embroidery Audiobahn Embroidery Dual 12” High-Strength, Glossy Graphite Composite Cone Dual 10” High-Strength, Glossy Graphite Composite Cone Tall, Narrower Surround for Increased Cone Surface Area and Effic
Wiring And Hookup The box can be wired in 1) a stereo configuration (each sub wired to a different channel) or 2) a mono configuration (both subs wired together to a single channel of an amp, or two bridged channels of an amp). Looking at the back of the box you will see each side's terminals. The left terminal is negative (-) and the right terminal is positive (+) for each set. If wiring in stereo mode, you will have a 4 ohm stereo load.
������������������������������������������������������� Warranty Continued How to receive warranty service: Contact your local Authorized Audiobahn Dealer, or call Audiobahn at (800) 488-8595 between the hours of 9:00 AM and 5:00 PM PST. If you are having problems with your system, we recommend you check the product carefully and thoroughly to confirm that the product truly has a manufacturer defect; as opposed to abuse, or other components in the system causing the failure.
