Owner`s manual

INSTALLATION and POWER
page 1 – 9
RD-12 / March 99RD-12 / Jun 2004
STEP 1.
Push wire attached to pin terminal, to
be removed, forward to free pin
terminal locking flanges from the
Nylon Connector Housing.
STEP 2.
Place extractor tip over pin
terminal to be removed. Press
handle portion of extractor in
downward motion until tip rests
upon Nylon Housing.
STEP 3.
Push ball at top of extractor
down toward pin terminal; pin
terminal will extract from Nylon
Housing.
EXTRACTOR PIN INSTRUCTIONS
If you should accidentally insert a crimp terminal pin into the wrong socket, the
supplied pin extractor tool (Waldom P/N W-HT-2023) will let you correct your mistake
without having to sacrifice a connector.