Owner`s manual

I N S T A L L A T I O N a nd P OWE R
page 1 – 5
RD-12 / March 99
Once the supply is rackmounted, it should be connected to the console
using the factory supplied cable. The console’s power supply connector is
located at the rear of the console, at the right end of the meterbridge bottom
pan. Note that the power supply cable’s 10-pin female connector has to be
rotated until its locating pins match the male connectors on the console. Do
not force a connector on; it attaches easily when properly aligned. Connect
the cable first to the console, then to the rear of the rackmount power
supply.
RD / Nov 2003
Front view of the SPS-180R
rackmount power supply
Power Supply
Console
End
End
E
D
F
H
PIN
1
2
3
4
PIN
8-pin Connector
Male
Power Supply End
10-pin Connector
Female
Console End
G
A
C
B
5
VIO
GRN
BRN
YEL
ORG
BLK
BLU
RED
PS Cable Pinout
VIO
GRN
BRN
YEL
ORG
Phantom
6
BLK
7
BLU
8RED
Digital Ground
Digital Ground
Digital+
Digital+
Analog Ground
-V in
+V in