Technical data

Manual VIPA System 300S SPEED7 Index
HB140E - CP - RE_343-1EX71 - Rev. 09/46 A-1
Appendix
A Index
A
Address at start-up ....................... 4-11
Addressing
SPEED-Bus............................. 4-18
AG_RECV (FC 6) ......................... 4-40
AG_SEND (FC 5) ......................... 4-40
Application layer ............................. 4-5
Assembly ................................. 2-1, 2-4
CPU 31xS................................. 2-4
Direction.................................... 2-2
SPEED-Bus .............................. 2-5
B
Basics ...................................... 1-1, 4-2
Communication layers .............. 4-2
IP address and subnet............ 4-11
ISO/OSI reference model ......... 4-3
Protocols................................... 4-7
Terms ....................................... 4-6
Bit communication layer ................. 4-4
C
Cabling............................................ 2-8
Front connectors..................... 2-10
Compatibility ................................... 1-6
Connection configuration ............. 4-26
Connection end point ................... 4-31
Connection path ........................... 4-32
Connection types.......................... 4-30
Core cross-section ......................... 1-6
Coupling........................................ 4-46
E
EMC.............................................. 2-12
Basic rules .............................. 2-13
Environmental conditions ............... 1-6
Error messages ............................ 4-41
ERW identifier .............................. 4-46
F
Fast introduction ........................... 4-14
NetPro..................................... 4-16
Firmware update ............................ 3-5
H
Hardware configuration ................ 4-19
Host-ID.......................................... 4-11
reserved.................................. 4-12
Hub ................................................. 4-6
I
Installation ....................................... 2-1
Installation guidelines.................... 2-12
Interface .......................................... 3-3
Interference influences .................2-12
IP address..................................... 4-11
Classes................................... 4-12
ISO transport connection.....4-10, 4-33
ISO/OSI reference model ............... 4-3
Isolation of conductors..................2-14
ISO-on-TCP connection ........4-9, 4-33
L
LEDs ...............................................3-4
M
MAC address ................................ 4-13
first start-up ............................ 4-13
Multicast ........................................4-29
N
NCM diagnostic............................. 4-43
Net-ID............................................ 4-11
NetPro ..................................4-16, 4-27
Adressen ................................ 4-34
Block parameters ................... 4-34
Connections ........................... 4-29
Fast introduction..................... 4-16
Options ................................... 4-35
Route...................................... 4-34
Station .................................... 4-28
link up ................................ 4-28
Network ........................................... 4-6
Network layer .................................. 4-4
O
Operating mode ............................ 4-32
Operating mode switch................... 3-4
ORG format ..................................4-46
Overview
System 300 .............................. 1-3
P
PG/OP channel.............................4-22
pkg file............................................. 3-5
PLC header................................... 4-48
PLC program ................................ 4-36
Port................................................4-34
Power supply............................1-6, 3-5
Presentation layer ........................... 4-5