Technical data

Chapter 4 Deployment Manual VIPA System 300S SPEED7

4-44 HB140E - CP - RE_343-1EX71 - Rev. 09/46

There are two options to start the diagnostic tool:

• Via Windows-START menu > SIMATIC ... NCM S7 > Diagnostic

• Within the project engineering res. the hardware configuration via the

The working surface of the diagnostic tool has the following structure:

The

navigation area at the left side contains the hierarchical listed

diagnostic objects. Depending on CP type and configured connections

there is an adjusted object structure in the navigation area.

The

information area at the right side always shows the result of the

navigation function you chose in the

navigation area.

Navigation area Information area

A diagnostic always requires an online connection to the CP you want to

control. For this click on

at the symbol bar. The following dialog window

appears:

Set the following parameters under destination station:

Connection...: Ind. Ethernet TCP/IP

Station addr.: Enter the IP address of the CP

Module rack/slot:

Enter the

module rack and slot of the CP 343 that you’ve placed at the 2.

slot.

Set your PG/PC interface to TCP/IP...RFC1006. Via [OK] you start the

online diagnostic.

Start NCM

diagnostic

Structure

No diagnostic

without

connection