Technical data

Chapter 4 Deployment Manual VIPA System 300S SPEED7
4-20 HB140E - CP - RE_343-1EX71 - Rev. 09/46
The hardware configurator is a part of the Siemens SIMATIC manager. It
serves the project engineering. The modules that may be configured here
are listed in the hardware catalog.
For the deployment of the System 300S modules at the SPEED-Bus, the
inclusion via the GSD-file SPEEDBUS.GSD from VIPA in the hardware
catalog is required.
Note!
For the project engineering a thorough knowledge of the SIMATIC
manager and the hardware configurator from Siemens are required and
assumed!
The GSD (Geräte-Stamm-Datei) is online available in the following
language versions. Further language versions are available on inquires.
Name Language
SPEEDBUS.GSD german (default)
SPEEDBUS.GSG german
SPEEDBUS.GSE english
The GSD files may be found at www.vipa.de at the Service part.
The integration of the SPEEDBUS.GSD takes place with the following
proceeding:
• Browse to www.vipa.de.
• Click to Service > Download > GSD- and EDS-Files > Profibus.
• Download the file Cx000023_Vxxx.
• Extract the file to your work directory. The SPEEDBUS.GSD is stored in
the directory
VIPA_System_300S.
• Start the hardware configurator from Siemens.
• Close every project.
• Select Options > Install new GSD-file.
• Navigate to the directory VIPA_System_300S and select
"SPEEDBUS.GSD".
The modules of the System 300S from VIPA are now included in the
hardware catalog under
Profibus-DP / Additional field devices / I/O /
VIPA_SPEEDBUS
.
Requirements
Include the
SPEED7-GSD-file