Installation manual

Volume ▲/▼ To increase the volume, press ▲. To decrease the volume, press ▼.
Mute
To mute the audio on a KPS and KP-3 keypad, press ▲ and ▼ together.
To un-mute the audio, press either the
▲ or ▼ button. From a remote
control, press the
MUTE button to mute and un-mute the audio.
Sources
To select a source, momentarily press the source’s button. The source
LED illuminates.
Once the source is selected, you can cycle through the programmed short-
press IR by repeatedly pressing the button. Press-and-hold the source button
for about 3 seconds or until the source
LED flashes on the keypad to access
additional programmed IR commands for the source.
Stop Commands STOP commands (when programmed) are automatically sent to the sources
when the first Zone turns on, the last Zone turns off, and when the last
Zone listening to a particular source switches to another source or turns off.
SYSTEM OPERATION
4.3