Installation manual

Audioaccess Remote Controllers
Power
To turn on a single Zone, momentarily press the keypad ON button (or
ON/OFF button on remote control) to turn on the default source. The
ON LED
illuminates on the keypad(s). To turn off a single Zone, momentarily
press the
ON button again. A zone may also be turned on by directly selecting
any source button (PX-700 with v1.1 or higher).
To turn on an ALL ON group, start with the zone off, then press-and-hold
the
ON button for about 3 seconds or until the ON LED flashes on the key-
pad.
To turn off an ALL ON group, momentarily press the ON button from any
Zone within the group.
To turn off all Zones in the Installation regardless of
ALL ON grouping, go to
any keypad, make sure it is
ON, then press-and-hold the ON button for
about 3 seconds or until the
ON LED flashes on the keypad.
RT-A-2 RT700 URC-8090
SYSTEM OPERATION
4.2