Owner`s manual

5
Connection Method #1
Use this method when you are
using the AAS88 with your main
receiver/amplifier. Connect the
main left and right speaker-
level outputs on your receiver/
amplifier to the Input 1 (for left
channel) and Input 2 (for right
channel) connectors on the
AAS88 loudspeaker or connec-
tion panel. Connect the Output 1
terminals to the corresponding
terminals on your front left
speaker, and the Output 2
terminals to the corresponding
terminals on your front right
speaker.
You may wish to mount the
AAS88 horizontally to preserve
the stereo image of the left and
right low frequencies.
The AAS88’s onboard cross-
over feeds the low-passed
signal (2nd order at 100Hz) to
the AAS88 subwoofers, and
the high-passed signal to the
speaker-level outputs for
connection to the satellite
speakers.
AAS88
L
1
L 2
L 3
L 4
BLK
GRN
BLK
ORN
J 1
C 1
C 3
C 2
+ OUT 2 –
+ OUT 1 –
C 4
J 2
+ IN 2 –
+ IN 1 –
AAS88
L
1
L 2
L 3
L 4
BLK
GRN
BLK
ORN
J 1
C 1
C 3
C 2
+ OUT 2 –
+ OUT 1 –
C 4
J 2
+ IN 2 –
+ IN 1 –
– +– +
Receiver/Amplifier Speaker Outputs
L
eft Right
– +
Front Left Speaker
– +
Front Right Speaker
Rear of Right AAS88Rear of Left AAS88
Connection Method #1, Using Two AAS88 Loudspeakers (Use Shorting Straps)
®®
– +– +
Receiver/Amplifier Speaker Outputs
Left Right
– +
Front Left Speaker
– +
Front Right Speaker
YEL/BLK
YEL
WHT/BLK
WHT
ORG/BLK
ORG
GRE/BLK
GRE
INPUT 1
INPUT 2
OUTPUT 1 OUTPUT 2
– + – + – + – +
YEL/BLK
YEL
WHT/BLK
WHT
ORG/BLK
ORG
GRE/BLK
GRE
INPUT 1
INPUT 2
OUTPUT 1 OUTPUT 2
– + – + – + – +
Connections Panel of
Left AAS88 Back Box
Connections Panel of
Right AAS88 Back Box
Connection Method #1, Using Two AAS88 Loudspeakers
With Back Boxes (Use Shorting Straps)
JBLP1948-AAS88 OM 5/26/05 3:58 PM Page 5