Owner`s manual

10
PAINTING THE SPEAKER
FRAME AND GRILLE
Audioaccess
AAS Series loud-
speakers can be painted to match
any décor. If you wish to change
their color
,
the sa
tin finish on the
grille and frame will function as a
primer coat. Before painting, install
the plastic paint shield securely into
the recess in the baffle. This will
protect the speaker components
and baffle from paint residue.
Use a high-quality spray paint,
and
a
pply a thin coat of color. Paint the
grille separately from the baffle
before installing it.
Be certain the grille perfora-
tions remain free of paint.
Filling them with paint will
diminish the sound quality.
7. Remove the wood centering
bars and replace the flat-head
screws into the holes left over
(the holes left in the cabinet
face underneath the bars are
also counterbored to accept the
flat-head screws).
8. The enclosure is now installed
and ready for the wallboard to
be installed over it.
9. Make the connections from
your receiver/amplifier to the
AAS88 back box connections
panel, and to any other speak-
ers as appropriate for your sys-
tem, following the instructions
on pages 4–7. Connect the
eight wires hanging from the
bottom of the AAS88BB back
box to the correct terminals on
the AAS88 loudspeaker. See
pages 6–7.
S
ee
Detail A
JBLP1948-AAS88 OM 5/26/05 3:58 PM Page 10