User Manual

HX2040 Hand-Held Transmitter

Setting up the HX2040

. . . . . . . . . . . . . . . . . . . . . . .

To set up the HX2040 :

• Fit the battery.

• Switch on by pressing and holding the grey On button

below the infra-red port for one second.

• Check or select the operating frequency.

• Check or set the gain.

• Check or set the low frequency cut ﬁlter.

• Check the battery status.

These steps are explained below:

Fitting the battery

• Open the battery compartment by gripping the cover and

sliding it gently away from the body of the HX2040.

• Fit the battery with the positive terminal uppermost and

close the battery cover until it clicks shut.

Do not twist or turn the battery cover.

Removing the battery

The battery can easily be removed by pushing a small coin

into the slot in the compartment beneath the battery.

Coloured

identification

button

Microphone

mount

Microphone

capsule

Windshield

Anti-roll ring

Transmitter

body

Coloured

identification

ring

Infra-red

port

On button

On/Overload

indicator

Battery

compartment

with integral

antenna