User Manual

miniTX Transmitter
88
13
Technical specification
. . . . . . . . . . . . . . . . . . . . . . . .
Frequency range
470MHz–1000MHz
Number of frequencies
32 pre-programmed
Frequency stability
Better than ETS 300–422
Switching range
Up to 24MHz
Output power
25mW nominal
RF output connector
SMA 50Ω
Audio input connector
4 pin Lemo™
Other variant available: 3 pin Lemo™
System frequency
response
50Hz to 18kHz ±1dB
System THD measured
at 1kHz
<0.1% at working levels
<0.3% at gain position 9 with
-6dB input in overload
Gain control range
30dB in 8 steps
Maximum input level
0dB gain position 2
Indicators
Red LED to indicate overload
Flashing orange LED to indicate
standby mode
Static orange LED for low battery
Batteries
2 x AAA (LR03) 1.5V type alkaline
Battery life
Typically 5 hours with alkaline type
batteries, longer with lithium type
Other
miniTX can be switched ON/OFF
through clothing via Control-X
(available separately)
Size
16.5 x 82 x 48mm (DxHxW)
Weight
90g inc batteries
Operating temperature
-20°C to +55°C
Compliant to
R&TTE, FCC, EN 300-422 EN 300-445
0891