User Manual

miniTX Transmitter
88
12
When not in use the power should be switched off by
removing the microphone plug or input cable.
Putting the miniTX into sleep mode
• Press MENU followed by v.
The display will indicate:
Tx
OFF
• Align the front of the SwitchiR with the infra-red port on
the transmitter and press OK.
The display will show:
tr oFF
To switch the transmitter on again:
• Press MENU.
The display shows:
FREQUENCY
MHz
Fr
• Align the front of the SwitchiR with the infra-red port on
the transmitter and press OK.
The display shows:
Error
The red overload LED will flash on momentarily to indicate
that the miniTX has woken from sleep mode.
• Press MENU.
The display shows:
FREQUENCY
MHz
Fr
• Align the front of the SwitchiR with the infra-red port on
the transmitter and press OK.
The display shows the current
frequency; for example:
FREQUENCY
Tx MHz
857.950
Alternatively, you can use the Control-X to turn the miniTX
on again.