Ol-\c-€ Ve€s,e,,.t AU lilDililt@ OPERATING INSTRUGTIONS AND CONNECTIONS SA SERIES MIXER AMPLIFIERS Audio Telex Communicolions Ply Lld SYDNEY MEI.BOURNE BRISBAI{E '12G124 Beoconsfield St 4/2630 42 Commerciol Rood AUBURN NSW 2144 Howteys Rood NOTNNG HILI VIC 3168 Pri\ote Bog P, 114 O.
SA SERIES AMPLIFIERS OPERATING INSTRUCTIONS SA SERIES MIXER AMPLIFIERS Congratulations on your purchase of our SA series mixer amplifier. As you are no doubt aware , mains power must be disconnected before removing the lid or making any internal adjustments or connections to the amplifier. The SA Series Mixer Amplifiers are two rack height units suitable for direct rack mounting in a standard 482mm rack format, or desV table mount by means of the rubber feet provided.
OPEBATI NG INSTRUCTIONS SA SER]ES AMPLIFIERS CONNECTIONS (fig2) o-o o #1. o ol O O O-'..o/ -.---O AUxz AUxl LrNE O O aa-i"" 7--., (. o) i 'o ol \o,/i\o,/ \-/O vO Mrc4 i I : do )- IL 1.... Three pin IEC mains power inlel24Ol120 vac with built in fuse drawer and spare fuse. Ensure the mains cord is disconnected before replacing the fuse.( Fuse sizes are indicated further on in these instructions. ) 2.... Terminalstrip lor speaker connections are from left to right as follows; term 1.....
OPERATING INSTRUCTIONS SA SERIES AMPLIFIERS SPECIAL ACCESSORIES TONE GENERATORS ; Four types of tone generators are avail able as options . They are easily fined by first removing the mains cord and then , by means of screws on either side, remove the lid. Attach the module to the metal base of the amplifier, using the adhesive tape provided. Ptug the seven pin plug into the socket as shown on the diagram supplied with the tone module. Replace the lid and reconnect the mains cord.
