AT-LP2D-USB Turntable Software Guide Tourne-disque AT-LP2D-USB Guide logiciel Tornamesas AT-LP2D-USB Guía de software
AT-LP2D-USB Turntable Contents A note about software ......................................................................................................2 System requirements ........................................................................................................2 Installing Cakewalk pyro Audio Creator software (for PC use only) ............................3 Setting up your PC (with Windows XP) to work with AT-LP2D-USB Turntable ..........
Installing Cakewalk pyro Audio Creator software EN (for PC use only) 1. Before installing software, assemble the turntable, following directions in the included AT-LP2D-USB Turntable Owners Manual. 2. Plug the AC cord on your turntable into an AC power outlet. Using the supplied 3.5 mm-to-RCA female adapter cable, you can plug a pair of headphones directly into the line output of your turntable.
Setting up your PC (with Windows XP) to work with AT-LP2D-USB Turntable (for either pyro Audio Creator or Audacity software packages included with your turntable) 1. Close programs operating on your computer. 2. Start menu > Control Panel > Sounds and Audio Devices • Begin at your Start menu. Select Control Panel. 4 • Select (double-click) Sounds and Audio Devices.
EN 3. The following screen will pop up: 4. Select the Voice tab. • In the Voice playback area of the window, select your computer's internal sound card (not USB Audio CODEC; not Microsoft Sound Mapper). • In the Voice recording area of the window, select USB Audio CODEC. Click Apply. NOTE: If the “USB Audio CODEC” option does not appear, check the USB cable to ensure it is properly connected to the USB port.
Setting up your PC (with Windows XP) to work with AT-LP2D-USB Turntable (for either pyro Audio Creator or Audacity software packages included with your turntable) 5. Next, select the Audio tab. • In the Sound playback area of the window, select your computer's internal sound card. • In the Sound recording area of the window, select USB Audio CODEC. • Check the following box: Use only default devices. • Click Apply; then click OK.
Setting up your PC (with Windows Vista) to work with AT-LP2D-USB Turntable EN (for either pyro Audio Creator or Audacity software packages included with your turntable) 1. Start menu > Control Panel > Sound. Begin at your Start menu. Select Control Panel (classic view). 2. Select (double-click) Sound. 3. Select the Recording tab. Make sure that the USB Audio CODEC is set as the default recording device. (You should see a green check mark beside USB Audio CODEC.
Setting up your PC (with Windows Vista) to work with AT-LP2D-USB Turntable (for either pyro Audio Creator or Audacity software packages included with your turntable) 4. Select the Playback tab. Select your internal sound card speakers (these are usually the first listed). 5. Click Apply; then click OK. 6. Close your Control Panel.
Recording Albums and Burning CDs with Cakewalk pyro Audio Creator EN These are basic instructions using Cakewalk pyro Audio Creator. For complete instructions, please see the Help menu on your Cakewalk pyro Audio Creator program. 1. Open the Cakewalk pyro Audio Creator application. Two screens will appear initially: the welcome (help) screen for pyro Audio Creator, and the program screen. If you wish, you can minimize or close the welcome screen. 2.
Recording Albums and Burning CDs with Cakewalk pyro Audio Creator These are basic instructions using Cakewalk pyro Audio Creator. For complete instructions, please see the Help menu on your Cakewalk pyro Audio Creator program. 3. Next, click on the Editor button. To monitor your recording, click on the Input Monitor button in the lower left portion of the window. 4. Then, click on the Record button in the Audio Editor, play your record, and watch the record meters. 5.
Saving Audio Files with pyro Audio Creator EN Audio Creator has two save commands: Save and Save As. Use the Save As command (actually File-Save As) to save your files when you have finished editing them. This command allows you to create new files that include all the changes you have made in the Audio Editor, and at the same time allows you to convert files to different formats for publishing on the web, burning CDs, etc.
Saving Audio Files with pyro Audio Creator To Save Files in MP3 Format This is a very popular format for compressing files in order to send them over the Internet or prepare them to be played on portable players. To Save Files in WMA Format This is Microsoft's file format for compressing files. It is a high-quality format similar to MP3. To Save Files in MP3 Format: 1. Use the File-Save As-MP3 command to open the Save As dialog. To Save Files in WMA Format: 1.
Burn an Audio CD with Cakewalk pyro Audio Creator EN 1. Insert a blank CD-R disc in the destination drive. 2. Open the Burner module by clicking the Burner button in the Audio Creator Toolbar. 3. Click the Audio CD Burner tab of the module. 4. Select a destination CD-writing drive by using the Target Drive dropdown list. 5. Click Add Track to locate and import the audio files you wish to burn to CD.
Overview of pyro Audio Creator GUI and Controls The Toolbar is your primary access point for Audio Creator's various modules. Each module (except the Audio Editor) is dedicated to a single task. You can access a module simply by clicking its button on the Toolbar, or by dragging files onto a button. You can also access application help and preferences via the Toolbar. Because Audio Creator is meant to be left on (open and running)–the Toolbar can be minimized to the Windows system tray. C. D.
Editing Audio in pyro Audio Creator EN The Audio Editor module displays files as waveforms (graphical representations of audio files), and gives you simple audio editing tools to do common editing tasks quickly and easily. Most audio editing involves simple cut-copy-paste edits, adding fade-ins or fade-outs, and adjusting volume. However, the Audio Editor module also contains numerous professional-level editing tools and commands that are there if you need them.
Installing Audacity software (instructions for Mac OSX and above) 1. Before installing software, assemble the turntable, following directions in the included AT-LP2D-USB Turntable Owners Manual. 2. Plug the AC cord on your turntable into an AC power outlet. 3. Next, use the included USB cable to connect the turntable to your Mac’s USB port. USB AC RCA USB cable (included) 4.
Setting up your MAC (OSX and above) to work with AT-LP2D-USB Turntable EN (Audacity) 1. Open the Audacity program. 2. Select Preferences from the Audacity menu. 3. Select Audio I/O tab at the top left. • Under Playback, Device, select Built-in Audio. • Under Recording, Device, select USB Audio CODEC. • Under Recording, Channels, select 2 (Stereo). • Check the box marked Software Playthrough.
Setting up your MAC (OSX and above) to work with AT-LP2D-USB Turntable (Audacity) 4. Next, select Quality tab at the top. • Default Sample Rate: 44100 Hz. • Default Sample Format: 16-bit. • Real-time sample rate converter: Fast Sinc Interpolation. • High-quality sample rate converter: High-quality Sinc Interpolation. • Real-time dither: None. • High-quality dither: Triangle. • Select OK to save settings and exit Preferences menu. 5.
Additional Macintosh audio settings EN We have set the Audacity playback and record settings. Now it's time to set the separate Macintosh audio playback and record settings. 1. Go to Applications > Utilities > then select and open Audio MIDI Setup. 2. In the Audio Midi window under the tab Audio Devices, select the following: • Under System Settings, Default Input, select USB Audio CODEC. • Under System Settings, Properties For, select USB Audio CODEC.
Installing Audacity software (instructions for PC) 1. Before installing software, assemble the turntable, following directions in the included AT-LP2D-USB Turntable Owners Manual. 2. Plug the AC cord on your turntable into an AC power outlet. 5. Turn your computer on. 6. Insert the included Audacity CD. An Audacity window will appear. Click Audacity Setup icon to install. Follow the directions on the pop-up windows to install the software. 3.
Setting up your PC to work with Audacity EN (See Setting up your PC to work with AT-LP2D-USB Turntable on page 4.) NOTE: See page 4 for important instructions on how to setup your PC to work with AT-LP2D-USB turntable before continuing. 1. Launch the Audacity program from your Start menu. 3. Select Audio I/O tab at the top left. • Under Playback, Device, select your internal sound card. • Under Recording, Device, select USB Audio CODEC. • Under Recording, Channels, select 2 (Stereo).
Setting up your PC to work with Audacity (See Setting up your PC to work with AT-LP2D-USB Turntable on page 4.) 4. Next, select Quality tab at the top. • Default Sample Rate: 44100 Hz. • Default Sample Format: 16-bit. • Real-time sample rate converter: Fast Sinc Interpolation. • High-quality sample rate converter: High-quality Sinc Interpolation. • Real-time dither: None. • High-quality dither: Triangle. • Select OK to save settings and exit Preferences menu. 22 5.
Recording Albums with Audacity To get started with Audacity, follow the instructions below. For in-depth information on recording and saving projects, please visit the on-line Audacity manual at http://audacity.sourceforge.net/manual-1.2/index.html and the detailed on-line tutorials at http://audacity.sourceforge.net/help/tutorials. EN 2. How to record • Set your USB turntable up to play the song or album you want to record. • Click on the red Record button 1.
Tourne-disque AT-LP2D-USB Table des matières Remarque concernant les logiciels ................................................................................24 Configuration système requise ......................................................................................24 Installation du logiciel Cakewalk pyro Audio Creator (pour PC uniquement) ..........25 Configuration de votre PC (avec Windows XP) pour pouvoir utiliser le tourne-disque AT-LP2D-USB .................................................
Installation du logiciel Cakewalk pyro Audio Creator (pour PC uniquement) Configuration de votre PC (avec Windows XP) pour pouvoir utiliser le tourne-disque AT-LP2D-USB FR (valable pour les deux progiciels pyro Audio Creator et Audacity fournis avec votre tourne-disque) 1. Avant d’installer le logiciel, assemblez le tourne-disque en suivant les instructions du Manuel de l’utilisateur fourni avec le tourne-disque AT-LP2D-USB. 1. Fermez tous les programmes en cours d’exécution sur votre ordinateur. 2.
Configuration de votre PC (avec Windows Vista) pour pouvoir utiliser le tourne-disque AT-LP2D-USB Enregistrement d’albums et gravure de CD avec Cakewalk pyro Audio Creator (valable pour les deux progiciels pyro Audio Creator et Audacity fournis avec votre tourne-disque) Il s’agit ici des instructions de base pour l’utilisation de Cakewalk pyro Audio Creator. Pour obtenir des instructions plus détaillées, veuillez vous référer à l’aide de Cakewalk pyro Audio Creator. 1.
Enregistrement de fichiers audio avec pyro Audio Creator Audio Creator possède deux commandes d’enregistrement : Save (Enregistrer) et Save As (Enregistrer sous). Utilisez la commande Save As (en fait File-Save As, Enregistrer fichier sous) pour enregistrer vos fichiers lorsque vous avez fini de les modifier.
Enregistrement de fichiers audio avec pyro Audio Creator Enregistrer des fichiers au format MP3 Ce format est très populaire pour compresser des fichiers afin de les envoyer via Internet ou de les lire sur des lecteurs portables. Enregistrer des fichiers au format WMA Il s’agit du format de fichier Microsoft servant à compresser des fichiers. C’est un format de grande qualité, similaire au format MP3. Enregistrer des fichiers au format MP3 : 1.
Graver un CD audio avec Cakewalk pyro Audio Creator Aperçu de l’interface utilisateur graphique et des commandes de pyro Audio Creator 1. Insérez un disque CD-R vierge dans le lecteur cible. La barre d’outil constitue votre premier accès aux différents modules d’Audio Creator. Chaque module (excepté Audio Editor) est dédié à une tâche unique. Vous accédez à un module en cliquant simplement sur le bouton correspondant dans la barre d’outils ou en glissant les fichiers sur ce bouton.
Édition de fichiers audio avec pyro Audio Creator Installation du logiciel Audacity (instructions pour Mac OSX et versions supérieures) Le module Audio Editor affiche les fichiers sous forme d’ondes (représentations graphiques de fichiers audio) et vous offre des outils d’édition audio vous permettant d’effectuer rapidement et simplement des tâches d’édition classiques.
Configuration de votre MAC (OSX et versions supérieures) pour pouvoir utiliser le tournedisque AT-LP2D-USB (Audacity) Paramètres audio Macintosh supplémentaires FR Les paramètres de lecture et d’enregistrement d’Audacity sont maintenant configurés. Il reste à définir les paramètres de lecture et d’enregistrement audio Macintosh séparés. 1. Ouvrez le programme Audacity. 2. Sélectionnez Preferences (Préférences) dans le menu d’Audacity. 3. Sélectionnez l’onglet Audio I/O (E/S Audio) en haut à gauche.
Installation du logiciel Audacity (instructions pour PC) Configuration de votre PC pour pouvoir utiliser Audacity (Voir Configuration de votre PC pour pouvoir utiliser le tourne-disque AT-LP2D-USB, page 25.) 1. Avant d’installer le logiciel, assemblez le tourne-disque en suivant les instructions du Manuel de l’utilisateur fourni avec le tourne-disque AT-LP2D-USB. 2. Branchez le cordon CA de votre tourne-disque dans une prise de courant alternatif. 3.
Enregistrement d’albums avec Audacity En savoir plus sur Cakewalk pyro Audio Creator Pour prendre en main Audacity, suivez les instructions ci-dessous. Pour obtenir des informations plus détaillées sur l’enregistrement de disques et de projets, consultez le manuel d’Audacity en ligne sur http://audacity.sourceforge.net/manual-1.2/index.html et les tutoriaux en ligne sur http://audacity.sourceforge.net/help/tutorials.
Tornamesas AT-LP2D-USB Contenido Nota sobre el software ....................................................................................................34 Requisitos del sistema ....................................................................................................34 Instalación de Cakewalk pyro Audio Creator software (sólo para PC) ......................35 Configuración del PC (con Windows XP) para trabajar con el tornamesas AT-LP2D-USB .....................................................
Instalación del software Cakewalk pyro Audio Creator (sólo para PC) Configuración del PC (con Windows XP) para trabajar con el tornamesas AT-LP2D-USB ES (válida para los dos paquetes de software que se incluyen con el tornamesas: pyro Audio Creator y Audacity) 1. Antes de instalar el software, monte el tornamesas siguiendo las instrucciones incluidas en el Manual del usuario del tornamesas AT-LP2D-USB. 1. Cierre todos los programas en ejecución de su computadora. 2.
Configuración del PC (con Windows Vista) para trabajar con el tornamesas AT-LP2D-USB Grabación de álbumes y CD con Cakewalk pyro Audio Creator (válida para los dos paquetes de software que se incluyen con el tornamesas: pyro Audio Creator y Audacity) A continuación se indican las instrucciones básicas para utilizar Cakewalk pyro Audio Creator. Para obtener una información más completa, consulte, el menú Help (Ayuda) del programa Cakewalk pyro Audio Creator. 1.
Almacenamiento de archivos de audio con pyro Audio Creator ES Audio Creator tiene dos comandos que permiten guardar: Save (Guardar) y Save As (Guardar como). Utilice el comando Save As (Guardar como) (en realidad el comando es File-Save As [Archivo-Guardar como]) para guardar los archivos cuando haya terminado de editarlos.
Almacenamiento de archivos de audio con pyro Audio Creator Almacenamiento de archivos en formato MP3 Este es un formato de compresión de archivos muy popular, que permite enviarlos a través de Internet o prepararlos para su reproducción en reproductores portátiles. Almacenamiento de archivos en formato WMA Este es el formato de compresión de archivos de Microsoft. Se trata de un formato de alta calidad, similar al MP3. Para guardar archivos en formato MP3: 1.
Grabación de un CD de audio con Cakewalk pyro Audio Creator Descripción general de los controles y la interfaz de usuario de pyro Audio Creator 1. Introduzca un disco CD-R virgen en la unidad de destino. La barra de herramientas es el principal punto de acceso a los distintos módulos de Audio Creator. Cada módulo (excepto el Audio Editor) está dedicado a una única tarea.
Edición de audio en pyro Audio Creator Instalación del software Audacity (instrucciones para Mac OS X y versiones superiores) El módulo Audio Editor (Editor de audio) muestra los archivos como formas de onda (representaciones gráficas de los archivos de audio) y pone a su disposición sencillas herramientas de edición de audio que le permitirán realizar las tareas de edición más comunes de manera fácil y rápida.
Configuración del MAC (con OSX o superior) para trabajar con el tornamesas AT-LP2D-USB Parámetros de audio de Macintosh adicionales (Audacity) 1. Abra el programa Audacity. 2. Seleccione Preferences (Preferencias) en el menú Audacity. 3. Seleccione la ficha Audio I/O (Audio E/S) en la parte superior izquierda. • En Playback (Reproducción), Device (Dispositivo), seleccione Built-in Audio (Audio incorporado) • En Recording (Grabación), Device (Dispositivo), seleccione USB Audio CODEC (CÓDEC de audio USB).
Instalación del software Audacity Configuración del PC par trabajar con Audacity (instrucciones para PC) (Consulte el apartado Configuración del PC para trabajar con el tornamesas AT-LP2D-USB, en la página 35.) 1. Antes de instalar el software, monte el tornamesas siguiendo las instrucciones incluidas en el Manual del usuario del tornamesas AT-LP2D-USB. 2. Conecte el cable de CA del tornamesas al enchufe de alimentación de CA. 3.
Grabación de álbumes con Audacity Para comenzar a utilizar Audacity, siga las siguientes instrucciones. Para obtener información detallada sobre la grabación y el almacenamiento de proyectos, consulte el manual en línea de Audacity en http://audacity.sourceforge.net/manual-1.2/index.html y los tutoriales en línea detallados en http://audacity.sourceforge.net/help/tutorials. 1.
Audio -Technica U.S., Inc. 1221 Commerce Drive, Stow, Ohio 44224 (330) 686-2600 www.audio-technica.com P52024 ©2008 Audio -Technica U.S., Inc.
