User's Manual

Two 18” output cables, TA3F to XLRM
Pouch with belt clip (holds receiver)
Hook & loop fastener mount
Each of the three dual-channel camera-mount wireless systems also
includes the following:
ATW-1821 Camera-mount UHF Wireless Microphone System (dual-channel)
with Body-pack Transmitters
Two ATW-T1801 UniPak™ Body-pack Transmitters
Two Omnidirectional Lavalier Microphones
ATW-1822
Camera-mount UHF Wireless Microphone System (dual-channel)
with Plug-on Transmitters
Two ATW-T1802 Plug-on Transmitters
ATW-1823
Camera-mount UHF Wireless Microphone System (dual-channel)
with Plug-on and Body-pack Transmitters
ATW-T1801 UniPak™ Body-pack Transmitter
ATW-T1802 Plug-on Transmitter
Omnidirectional Lavalier Microphone
System Features (Dual-Channel)
• Two completely independent receiver channels in a single unit, for
simultaneous operation of two microphones
• Extremely compact receiver is easy to mount on a camera with included
Velcro-type fastener
• UHF reception with 996 frequencies selectable in 25 kHz steps
• Automatic frequency scanning for easy selection of open channels
• Tone Lock™ squelch system eliminates interference when transmitter is
off (Transmitters are compatible with Advanced Digital Tone Lock™
squelch on Audio-Technica’s 3000 Series UHF Wireless Systems)
• Two independent balanced outputs (you can assign function of each,
independently)
• Headphone monitor output with independent level control
• Battery fuel-level indicators on transmitters and receiver
• Soft-touch controls for easy frequency selection