User's Manual

27 | P a g e
AEW-T1000a UniPak: A 10-position audio input gain setting, selected through the function menu, serves
to match the audio input level to the transmitter for best modulation with minimum distortion. Available
choices are +12 dB to –6 dB in 2 dB steps. The default value is +6 dB.
AEW-T4100a and AEW-T6100a Dynamic Handhelds:
A 4-position audio input gain setting, selected through the function menu, serves to match the audio
input level to the transmitter for best modulation with minimum distortion. Available choices are +12 dB
to –6 dB in 6 dB steps. The default value is +6 dB.
AEW-T3300a and AEW-T5400a Condenser Handhelds:
A 3-position audio input gain setting, selected through the function menu, serves to match the audio
input level to the transmitter for best modulation with minimum distortion. Available choices are +12 dB,
+6 dB and 0 dB. The default value is +6 dB. In addition, a mechanical pad switch on the condenser capsule
(inside the screw-on wire mesh grille) can provide another 6 dB of attenuation. For best performance,
adjust the input level using the function menu choices, keeping the capsule’s mechanical switch at 0 dB. If
more audio attenuation is needed than the menu provides, then set the capsule’s pad switch to –6 dB.
For all transmitters: Select the highest audio level setting that does not result in over-modulation with
the highest audio/ instrument input levels (an AF indication on the receiver no higher than “+3”); watch
the receiver’s “AF” meter “+6” indication and the Alert light to make certain they are not triggered often
by the highest audio levels.
The transmitter’s dual-color Power/Mute LED, which is on during normal operation, will blink off if the
peak audio input reaches overload level.
Preset/Default Settings
A “PRESET” selection in the menu permits the storing of up to five different user-definable
configurations. Customized names, using letters, numbers and symbols, can also be created and stored
for Presets 1–5. In addition, a Default (“DEF”) choice permits returning all transmitter functions to their
factory-default settings.
To store Preset configurations:
1. Touch the Set button once to move to Menu mode.
2. Touch the Up arrow twice to move to “PRESET” in the LCD window.
3. Touch the Set button once and “LOAD” (or “STORE”) will appear in the LCD.
4. Touch the Up or Down arrow once, if needed, to change the selection to “STORE”.
5. Hold the Set button until “STORE” changes to “PRSET1” (or the name of the currently loaded Preset).
6. If desired, touch the Up or Down arrow to cycle through the available choices: “PRSET1” through
“PRSET5” (or their previously changed names).
7. Accept or enter a name for the Preset:
a. To accept the standard name (PRSET1 – PRSET5, or the previously stored name) for a new
Preset configuration and to update (overwrite) any previously stored configuration choices:
a1. At the desired Preset, hold the Set button until the first character blinks.