User's Manual

21 | P a g e
Using "PRESET" Store and Recall
There are two aspects to Preset operation: Storing a particular collection of settings for future use
(“STORE”), and recalling a stored collection of settings (“LOAD”). All Artist Elite receivers and transmitters
permit the storing and recalling of up to five user-defined Preset combinations—with customized names,
if desired—plus the recalling of the factory-defined Default (“DEF”) settings.
While the standard Preset names (“PRSET1” – “PRSET5”) can be used, customized receiver and
transmitter identification can simplify system operation, especially in larger systems. For example, a
guitar channel’s Rx Name could be “GUITAR”, while the transmitters for the performer’s two different
guitars could be named “GTR-1” and “GTR-2”.
To store Preset configurations:
1. Touch the Mode/Set button once to move to Menu mode.
2. Touch the Up arrow twice to move to “PRESET” in the LCD window. (The second line of LCD will show
currently loaded presets.)
3. Touch the Mode/Set button once. “LOAD” (or “STORE”) appears in the LCD.
4. Touch the Up or Down arrow once, if needed, to change the selection to “STORE.”
5. Hold the Mode/Set button until “PRSET1” (or the name of the currently loaded Preset) appears on the
second line of the LCD.
6. If desired, touch the Up or Down arrow to cycle through the available choices: “PRSET1” through
“PRSET5” (or their previously changed names).
7. Accept or enter a name for the Preset:
a. To accept the standard name “PRSET1“ – “PRSET5” (or previously stored name) for a new
Preset configuration and to update (overwrite) any previously stored configuration choices:
a1. At the desired choice, hold Mode/Set until the first character blinks, giving an
opportunity to change the name.
a2. To accept the standard (or existing) name, hold the Mode/Set button again until
“STORED” appears in the window. This stores the standard or existing Preset name with
the associated function choices and returns the unit to normal operation. The name of
the stored preset will appear in the top line of the display.
b. To enter a custom name for a Preset:
b1. At the desired choice, hold the Mode/Set button. The first character blinks.
b2. Using the Up or Down arrow, move through the available characters (see box below)
until the desired character is reached. Touch an arrow button for single steps, or hold it
down to scroll through the characters at increasing speed.
b3. Touch the Mode/Set button once to accept the first character and move to the
second character, which now is blinking. Use an Up/Down arrow button to find the