User's Manual

19 | P a g e
Touch the Up/Down arrow buttons to scroll through the characters until the desired character is
displayed. Touch the Mode/Set button to accept the character and advance to the next character. To
advance the cursor without changing the character, touch the Mode/Set button.
After setting the last character, hold the Mode/Set button to store the name and revert to normal
operation. Holding the Mode/Set button at any time during the naming process while the cursor is
flashing will store the setting and return the receiver to normal operation.
Note: To escape the naming process, touch the Mode/Set button repeatedly until the last character is
flashing, and then touch the Mode/Set button again to escape. At the flashing “ESCAPE” display, touch
the Mode/Set button to go back to the beginning of the name, or hold the Mode/Set button to return to
“QUIT.”
Note: While the receiver is in Edit mode, no action (no buttons pressed) for approximately 30 seconds
causes the receiver to revert to Menu mode.
While the receiver is in Menu mode, no action for approximately 30 seconds causes the receiver to revert
to normal operating mode. Any setting changes stored will remain in the “NAME?” memory location, and
the receiver will display “NAME?” because the settings were not saved to a user preset. This will occur
even if a user preset was previously loaded.
Receiver Functions
IntelliScan™ Channel Assignment System
The IntelliScan™ channel assignment system, provided on both the AEW-R4100 and AEW-R5200
receivers, eliminates the trouble and frustration normally encountered while attempting to find and
select usable, compatible frequencies in a multichannel system. The Artist Elite receivers are simply
connected together with included communication link cables. A “Master” receiver then “knows” how
many total channels it is looking for. It can scan the available frequencies, checking for local interference
sources, selecting a group of channels that will all work together (using a built-in frequency plan), and
automatically setting the other linked AEW receivers accordingly. Once this procedure is completed, the
transmitter frequencies must be set to match the receiver frequencies.
Receiver Locks
Programmable locks restrict the ability to change receiver settings, reducing the possibility of
unauthorized access or unintended changes during performances.
Setting Description
NO.LOC Receiver functions and frequency settings can be edited from the receiver’s front panel
or from an associated computer via an Ethernet connection to a linked AEW-R5200.
ALL.LOC Receiver functions and frequency settings cannot be edited from the front panel or from
a computer via an Ethernet connection to a linked AEW-R5200. ALL.LOC must be changed
via the receiver’s Menu before other settings can be changed.