User's Manual

18 | P a g e
Touch the Up/Down arrow buttons to scroll through the available choices for the function, stopping on
the desired choice.
Hold the Mode/Set button to accept the new choice. “STORED” appears in the display when the choice is
accepted. The receiver then reverts to Menu mode.
Continue this process until all desired function-setting changes are complete.
Note: To escape from Edit mode without making any changes, touch the Mode/Set button. “ESCAPE”
appears briefly in the display, and the receiver reverts to Menu mode.
Quitting and saving changes
The receiver has several methods of saving function settings. Each receiver has five loadable user presets
that may be given individual names (up to six characters), along with a special, non-loadable memory
location called “NAME?” that can store the most recent settings until they are changed.
To save a set of receiver function settings, use the Up/Down arrow buttons to scroll until the display
shows “QUIT.” The procedure for saving the current settings depends upon the desired location:
Saving to the “NAME?” location
If the current receiver settings do not need to be identified with a name, the special “NAME?” location
may be used to store them. As with the “last number redial” function on a telephone, these settings
remain stored in the receiver even if power is turned off. They disappear only if one of the settings is
modified.
To store settings in the “NAME?” location, touch the Mode/Set button. The display shows “NAME?” for
the receiver name.
Saving updated settings to the currently loaded user
“PRESET#” location
To update the receiver settings in the currently loaded user preset that is already named, hold the
Mode/Set button. The display shows “STORE XXXXXX” (where XXXXXX indicates the preset’s name).
Hold the Mode/Set button a second time. The first character of the name flashes.
Hold the Mode/Set button a third time. The display briefly shows “STORED”, and the receiver reverts to
normal operation.
Receiver Controls and Functions (Continued)
Saving to a different user PRESET# location
To store settings to a different user preset location, hold the Mode/Set button. The receiver shows
“STORE XXXXXX” (where XXXXXX indicates the loaded preset’s name).
Touch the Up/Down buttons to scroll to another preset location (the display shows the user-defined
name for each location, or “PRESET#” if no name has been assigned).
At the desired preset location, hold the Mode/Set button. The first character of the name becomes the
cursor and flashes.