User's Manual

12 | P a g e
Details of the computer setup and operation will be found in a separate AEW Control Interface manual
provided with AEW-R5200 receivers and 5000 Series systems.
Receiver Installation (Continued)
Receiver Controls and Functions
Figure C AEW-R5200 Receiver Front Panel
Front Panel Controls and Functions (Fig. C)
1 POWER SWITCH: Press Power switch in and the receiver readouts will light.
2 HEADPHONE OUTPUT: 1/4" (6.3 mm) TRS (“stereo”) phone jack. Plug in either a mono or "stereo"
headphone to monitor receiver signal.
3 HEADPHONE LEVEL CONTROL / CHANNEL SWITCH: Adjusts the level of the headphone jack only; it does
not affect receiver audio output. Press-and-release the knob to switch between Channel 1 and Channel 2.
4 HEADPHONE CHANNEL INDICATOR: Shows which receiver channel is feeding the monitor headphones.
Channel 1 / Channel 2
5 / 9 ALERT INDICATOR: The Alert Indicator lights:
(a) When the receiver is in the Mute mode,
(b) When no RF signal is received from the transmitter,
(c) When only one or two RF signal-strength bars are on,
(d) When the transmitter is in the Mute mode,
(e) When audio modulation level from the transmitter is close to the clipping point (AF +6 bar), or
(f) When the “LOW BAT” warning appears in the LCD (transmitter battery is weak).
Receiver Controls and Functions
6 / 10 LCD WINDOW: Liquid Crystal Display indicates control settings and operational readings. See Figure
G on page [--] for details.
7 / 11 UP/DOWN BUTTONS: Press Up or Down arrow button, in conjunction with the Mode/Set button,
to step through menus, select operating frequency and edit receiver function choices.
8 / 12 MODE/SET BUTTON: Use in conjunction with the Up/Down arrow buttons to step through menus,
choose operating frequency and select receiver function options.
13 FRONT-MOUNT ANTENNAS: Cables and panel connectors are included with the AEW-R5200 to permit
attaching antennas at the front panel.
Figure D AEW-R5200 Receiver Rear Panel
Rear Panel Controls and Functions (Fig. D)