User's Manual

Studio Broadcast System
Page 8 of 13
3.2. Matrix Screen - Receiver Measurement
The matrix screen allows the user to visualize specific connections between 32 possible
receivers and 24 possible transmitters. There are two modes: Receiver Test and
Transmitter Test.
In the receiver test mode the user selects a source transmitter - blue buttons on the
right side of the screen - and the screen on the left indicates the active receivers
currently linked to that transmitter. Active receivers which have been plugged into the
system are indicated with a blue square; green fill indicates a link to the selected
transmitter. It is best if at least 3 RP32s indicate a green “linked” status to a BP24
transmitter at all times. This screen is useful for experimenting with RP32 placement in
order to determine the best coverage.
Mode Swap Button
Σ Mode Select