Specification Sheet
AT-LP60
FULLY AUTOMATIC STEREO TURNTABLE SYSTEM
2 SPEEDS – 33
1
/
3
AND 45 RPM
Audio-Technica U.S., Inc., 1221 Commerce Drive, Stow, Ohio 44224 (330) 686-2600 E-mail: consumer@atus.com audio-technica.com ©2009 Audio-Technica U.S., Inc. Form No. 0460-2901-00
• Fully automatic operation
• Two speeds: 33
1
/
3
RPM and 45 RPM
• Professional aluminum turntable platter
• Integral Audio-Technica Dual Magnet
™
phono cartridge with
replaceable diamond stylus
• Built-in switchable stereo phono/line level pre-amplier
permits use of turntable with stereo systems having either
magnetic-phono inputs or “AUX” (line-level) inputs; also allows
convenient use of turntable with most powered speakers
• Damped lift/cueing mechanism with front-panel control
• Removable dust cover
Specications*
Type: Belt drive turntable, fully automatic; Platter: Aluminum; Motor: DC servo-controlled;
Speeds: 33
1
/
3
RPM, 45 RPM; Wow and utter: Less than 0.25% (WTD) @ 3 kHz (JIS);
Signal-to-noise ratio: >50 dB (DIN-B); Cartridge: Integral Dual Magnet
™
stereo cartridge with
diamond stylus; Output level: 2.5 mV nominal at 1 kHz, 5 cm/sec (Pre-amp “PHONO”); 150 mV
nominal at 1 kHz, 5 cm/sec (Pre-amp “LINE”); Phono pre-amp gain: 36 dB nominal, RIAA equalized;
Power: 120V AC, 60 Hz, 3W; Dimensions: 360.0 mm (14.17") W x 97.0 mm (3.84") H x 356.0 mm
(14.02") D; Net weight: 2.98 kg (6.6 lbs.); Furnished accessories: Dual RCA (female) to 3.5 mm
(
1
/
8
") mini-plug (male) stereo adapter cable; dual RCA (female) to 3.5 mm (
1
/
8
") mini-plug (female)
stereo adapter cable; 45 RPM adapter; Replacement stylus: ATN3600L
*Specications are subject to change without notice