User Manual

ATR7000 Series VHF Wireless Systems Installation and Operation
7
english
For future reference, please record your system information here (the serial
numbers appear near the screwdriver clip in each transmitter, and on the bottom
of each receiver):
Operating Frequency
Freq. Code Frequency • MHz
Receiver
Model ATR-R7000 Serial Number
Transmitter
Model ATR-T7100 or ATR-T7200 Serial Number
Application Freq. Code Freq. (MHz)
• Traveling frequencies: T2 169.505
(Normally work anywhere in the U.S.A.
and Canada.) T3 170.245
T8 171.905
Systems on these frequencies may be combined for up to three simultaneous
operating channels.
System Operating Frequencies
RF Interference
Please note that wireless frequencies are shared with other radio services. According to Federal
Communications Commission regulations, “Wireless microphone operations are unprotected
from interference from other licensed operations within the band. If any interference is received
by any Government or non-Government operation, the wireless microphone must cease
operation...”
If you need assistance with operation, please contact your dealer or the Audio Solutions team at
Audio-Technica. Extensive wireless information is also available on the A-T Website at
www.audio-technica.com.
Under Industry Canada regulations, this radio transmitter may only operate using an antenna of
a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce
potential radio interference to other users, the antenna type and its gain should be so chosen
that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for
successful communication.