User Manual

13
Specifications
Headphones
Type Closed-back dynamic
Driver 40 mm
Sensitivity 99 dB/mW
Frequency response 5 to 35,000 Hz
Impedance 32 ohms
Microphone
Type Electret condenser
Polar pattern Omnidirectional
Sensitivity -44 dB (1 V/Pa, at 1 kHz)
Frequency response 100 to 10,000 Hz
Communication specifications
Communication system Bluetooth version 5.0
RF output 1.2 mW EIRP
Maximum communication range Line of sight - approx. 10 m (33')
Frequency band 2.402 GHz to 2.480 GHz
Modulation method FHSS
Compatible Bluetooth profiles A2DP, AVRCP, HFP, HSP
Support codec AAC, SBC
Supported content protection method SCMS-T
Transmission band 20 to 20,000 Hz
Other
Power supply DC 3.7 V lithium polymer battery
Charging time Approx. 4 hours*
Operating time Continuous transmission time (music playback): Max. approx. 70 hours*
Weight 190 g (6.7 oz)
Operating temperature 5°C to 40°C (41° F to 104°F)
Accessories • USB charging cable (30 cm (12") USB Type-A / Micro USB Type-B)
Sold separately • Earpad
* The above figures depend on operating conditions.
For product improvement, the product is subject to modification without notice.
• The Bluetooth® word mark and logos are owned by Bluetooth SIG, Inc. and any use of such marks by Audio-Technica Corporation is
under license. All other trademarks are property of their respective owners.
• “AAC” logo is a trademark of Dolby Laboratories.