User Manual

9
Using the product
Listening to audio
• To connect for the first time, pair the product and your device via Bluetooth wireless technology. Once they are
paired, turn on the Bluetooth device’s Bluetooth connection, and then turn on the product.
• Use your Bluetooth device to start playback, referring to the device’s user manual as necessary.
Jog switch
Press
Plays or pauses music and videos.
*1
Press and hold
The speech recognition function (such as Siri, which is installed on iOS
devices) may start depending on the connected device.
Slide toward +
Slide and release
Increases the volume by 1 level.
*2
Slide and hold (about 2 seconds)
Plays the next track.
*1
Slide toward -
Slide and release
Decreases the volume by 1 level.
*2
Slide and hold (about 2 seconds)
Plays the previous track.
*1
*1 On some smartphones, you may not be able to do some operations, such as playing/pausing music and videos or going to the next/
returning to the previous track.
*2 A confirmation tone sounds each time you slide the jog switch. A low beep is heard when the volume is at the maximum or minimum
level.
• The volume control of some devices may not work well with the product.
Using the noise-cancelling function
The built-in microphones pick up the noise around you, allowing the product to produce a canceling signal to effectively
reduce the noise.
The noise-cancelling function turns on automatically when you turn on the power to the product.
You can toggle the noise-cancelling function on and off by double-tapping (2 presses) the touch sensor.
• The touch sensor indicator lamp lights, as follows, when you are
using the noise-cancelling function.
Lit in green: noise-cancelling function is on
Unlit: noise-cancelling function is off
• There is a difference in volume depending on whether the noise-
cancelling function is on or off.
Double-tap
(2 presses)
Touch sensor indicator lamp