User Guide

English
7
How to connect
Connect
1 Set your NFC-compatible device so that the NFC function can be used.*
* Refer to the user manual of your NFC-compatible device.
2 Slide the power/pairing switch of the product to the “ON”
position.
3 Touch your NFC-compatible device on the part just above
N-Mark on the product as shown in the figure and complete the
connection from your device.*
* Refer to the user manual of your NFC-compatible device for
the designated location to be touched on your device or how
to complete the connection from your device.
Disconnect
Touch your NFC-compatible device to the part just above the N-Mark on the product again to disconnect
the product from your device.
Switch the device
• If the product is connected to a
Bluetooth device and is then touched by an NFC-compatible device, the
connection will switch to this NFC device.
• If you have an NFC-compatible device connected with the product and touch that device to another NFC-
compatible device with
Bluetooth wireless technology, the first NFC-compatible device will disconnect
from the product and connect with the second NFC-compatible device.
About indicator lamp display
The indicator lamp of the product displays the following operating statuses by flashing or turning on.
L
Operating status
Indicator lamp display patterns ● Red ● Blue
Pairing Searching for device
● ● ● ● ● ● ● ● ● ● ● ● ● ● ●
...
Flashing
Connection
Waiting to be connected
●−−−−−−−−−●−−−−
...
Connecting
● −−−−−−−−−● −−−−
...
Remaining
battery level
Remaining battery level low
−− −− −−
...
Charge
Charging
...
Lit
Complete
...