ATH-SPORT60BT User Manual Wireless Headphones
Introduction Thank you for purchasing this Audio-Technica product. Before using the product, please read through the Quick Start Guide and Caution Guide, as well as this user manual when necessary, to ensure that you use the product correctly. Safety precautions Although this product was designed to be used safely, failing to use it correctly may result in an accident. To ensure safety, observe all warnings and cautions while using the product.
Safety precautions Cautions for rechargeable battery The product is equipped with a rechargeable battery (lithium ion battery). •• If battery fluid gets into eyes, do not rub them. Rinse thoroughly with clean water such as tap water and consult a doctor immediately.
Notes on use •• Make sure to hold the plug when connecting and disconnecting the USB charging cable. The USB charging cable may become severed or an accident may occur if you pull on the cable itself. •• Be sure to read the connected device’s user manual before use. •• Audio-Technica will not be liable in any way for any loss of data in the unlikely event that such losses should occur while using the product. •• When you are not using the USB charging cable, disconnect it from the product.
For a more comfortable Bluetooth® communication experience The effective communication range of this product varies depending on obstructions and radio wave conditions. For a more enjoyable experience, please use the product as close as possible to the Bluetooth device. To minimize noise and sound disruptions, avoid placing your body or other obstacles between the product’s antenna and the Bluetooth device.
Part names and functions Power supply/control button Use to turn the power supply ON/OFF, play/pause music and videos, and answer/ end phone calls. Microphone (for talking) Battery jack Use to connect the included USB charging cable and charge the product. Volume buttons Indicator lamp Adjust the volume using + and –. Displays the operating status and battery level of the product. Magnet sensor L/R (left/right) indicator Cable slider Use to adjust the length of the cable. It can also be removed.
Charging the battery • Fully charge the battery when using it for the first time. • When the rechargeable battery is running low, the headphones will play a confirmation tone and voice guidance notifying you of low battery level, and an indicator lamp will flash in red. When you hear/see these notifications, charge the battery. • It takes about 2 hours to charge the battery fully. (This time may vary depending on usage conditions.) 1.
Connective via Bluetooth wireless technology To connect the product to a Bluetooth device, the product needs to pair (register) with the device. Pairing a Bluetooth device • Read the user manual for the Bluetooth device. • Place the device within 1 m (3.3') of the product to perform pairing correctly. • To confirm the progress of the pairing process, wear the product while performing this procedure and listen for the confirmation tone. 1.
Connective via Bluetooth wireless technology About multipoint The product supports multipoint, which allows two Bluetooth devices to be connected at the same time. While you are listening to music with one device, you can answer a call that comes in from the other device. It is convenient if you have two smartphones, for example. • Audio-Technica does not guarantee the operation of all combinations of Bluetooth devices. Connecting via multipoint 1. Pair with the first Bluetooth device. 2.
Using the product The product can use Bluetooth wireless technology to connect to your device and play music or receive phone calls. Use the product for whichever of these purposes suits your needs. Note that Audio-Technica cannot guarantee the operation of displays, such as the battery level display, or applications via Bluetooth devices.
Using the product Attaching/removing the ear fins The product includes silicone ear fins in four sizes (XS, S, M, and L). At the time of purchase, M-size silicone ear fins are attached. Select ear fins that fit your ear, and attach them. 1. Remove the eartip, and then remove the ear fin already attached to the headphone. • Remove the ear fin by pulling it off from the rear of the headphone. 2. Attach the ear fin of your preferred size to the headphone.
Using the product Listening to music • To connect for the first time, pair the product and your device by Bluetooth wireless technology. If you have already paired the product and your Bluetooth device, turn on the Bluetooth device’s Bluetooth connection and turn on the product. • Use your Bluetooth device to start playback, referring to the device’s user manual as necessary. Power supply/control button Press Plays or pauses music.
Using the product Talking on the phone • If your Bluetooth device supports telephone features, you can use the product to talk on the phone. • When your Bluetooth device receives a phone call, the product's ringtone sounds. • If a call is received while you are listening to music, music playback is paused. When you finish the call, music playback resumes. * When Receiving a call Function Operation Press the power supply/control button. Answers the call.
Indicator lamp display The indicator lamp of the product indicates the product's status as explained below. Status Indicator lamp display pattern Pairing Searching for device Connection Connecting Battery level Battery level low Blue Red Flashing quickly Flashing The blue indicator lamp for the pairing and connecting statuses changes to a red indicator lamp.
Cleaning Get into the habit of regularly cleaning the product to ensure that it lasts for a long time. Do not use alcohol, paint thinners, or other solvents for cleaning purposes. Headphones/controller • When cleaning the headphones, remove the eartips. • If the product becomes soiled with sweat or dirt, wash it away with fresh water at room temperature (10 to 35 °C), or weak running water, instead of using soapy water.
Cleaning Cable/eartips • Wipe away dirt from the cable with a dry cloth immediately after use. Failure to clean the cable may cause it to deteriorate and harden over time, resulting in malfunction. • Wipe the cable's USB plug with a dry cloth if dirty. • Clean the eartips by removing them from the headphones and manually cleaning them with a diluted mild detergent. After cleaning, dry before using again.
Troubleshooting Problem Solution Power is not supplied. • Charge the product. Unable to pair. • Confirm that the Bluetooth device communicates using Ver. 2.1+EDR or higher. • Place the product and the Bluetooth device within 1 m (3.3') of each other. • Set the profiles for the Bluetooth device. For procedures on how to set profiles, refer to the Bluetooth device’s user manual. • Remove the pairing information for the Bluetooth device then pair the product with this device again.
Specifications Headphones Type Dynamic Driver 6 mm Sensitivity 90 dB/mW Frequency response 20 to 20,000 Hz Impedance 16 ohms Microphone Type MEMS type Polar pattern Omnidirectional Sensitivity -42 dB (1 V/Pa, at 1 kHz) Frequency response 100 to 8,000 Hz Communication specifications Communication system Bluetooth version 5.0 Maximum RF output 10 mW EIRP Maximum communication range Line of sight - approx. 10 m (33') Frequency band 2.402 GHz to 2.
