Owner's Manual
Table Of Contents
- User Manual (Firmware Rev2000 compatible version)
- About Firmware Update
- Introduction
- Safety precautions
- Notes on use
- About water-resistant (drip-proof) performance
- For a more comfortable Bluetooth® communication experience
- Part names and functions
- Charging the battery
- Connecting via Bluetooth
- Connecting via Bluetooth
- Using the product
- Indicator lamps on the headphones
- Voice guidance
- Cleaning
- Eartips
- Troubleshooting
- Specifications
- Quick Start Guide
- Caution Guide
- For a more enjoyable Bluetooth® product experience
- Battery Disposal
- Disposal of Old Electrical & Electronic Equipment (Applicable In European countries with separate collection systems) product
- Statement of Compliance
11
Connecting via Bluetooth
To connect the product to a Bluetooth device, the product needs to pair (register) with the device.
Pairing a Bluetooth device
• Read the user manual for the Bluetooth device.
• Place the Bluetooth device within 1 m (3.3') of the product to perform pairing
correctly.
• To confirm the progress of the pairing process, wear the product while performing
this procedure and listen for the confirmation tone.
1. Remove the headphones (L (left) and R (right)) from the charging case.
• The indicator lamps will flash in white.
2. Use your Bluetooth device to begin the pairing process and search for the product.
When your Bluetooth device finds the product, “ATH-CKS5TW” will be displayed on the device.
• For information about using your Bluetooth device, refer to the device’s user manual.
• This product may be displayed as "ATH-CKS5TW", "BLE_ATH-CKS5TW", or both. If both are displayed, select
"ATH-CKS5TW". If only one is displayed, select that one.
• If you pair again after pairing once, “ATH-CKS5TW” or “L_ATH-CKS5TW” may be displayed. Select either one to
pair.
3. Select “ATH-CKS5TW” to pair the product and your Bluetooth device.
• Some devices may ask for a passkey.
In this case, enter “0000”. The passkey may also be called a passcode,
PIN code, PIN number, or password.
• The product sounds a confirmation tone when pairing is complete.
100%12:00
Bluetooth ON
ATH-CKS5TW