Technical data

10
ATCS-A60
ATCS-D60
atcs-60 series
infrared conference system ( PC 491-MC 134)
Technical Data ATCS-A60
Bandwidth 1~10MHz
Number of Channels Voice 5 ch, monitor 4 ch and data 2 ch
Connecting Terminal BNC terminal ×1
Power Supply DC24V (provided by master control unit ATCS-C60)
Weight 151g
Diameter 108 mm
Depth 55,5 mm
Accessories 1 installation bracket, 2 installation bracket fixation screws
Technical Data ATCS -D60
Number of Distributions 2 ways
Transmission Frequency Bandwidth 1~10MHz
Connecting Terminals BNC terminal ×3
Current Pass Through below 30V and below 1A
Weight 167g
ATCS-A60
IR transmitter/receiver unit
•
The ceiling or wall mounted antenna transceiver connects via 75 ohms BNC coaxial cable to the
master control unit. Utilizing an automated gain gives the A60’s greater IR performance.
Please use 5C2V quality cable or better.
Please keep a distance of 0.5m or above from the inverter-type illuminator for installation.
ATCS-D60
Distributor
•
The 1 in 2 out distributors increase the number of BNC inputs into the master control unit two
fold from 4 inputs for up to 16 antenna transceiver connections covering a larger transmission
area.
When 3 sets are used, one terminal can be
connected to a maximum of 4 IR transmitter/
receiver units.