Specification

audio-technica phono cartridges guide - 2019/20 - 51
Headshells
• Threaded headshell avoiding use of nuts when fitting cartridge
• 7 pairs of screws (3mm, 5mm, 6mm, 8mm, 10mm, 12mm and 14mm)
• Includes gold plated terminals quad wire
• 3 pairs of M2.6 threaded holes with 3.5mm distance allows 3overhang
positions adjustment
• 10g with cables, without screws
AT-MG10
10g headshell magnesium body
49
,00 e
Including VAT
EAN 4961310001957
• Threaded headshell avoiding use of nuts when fitting cartridge
• 7 pairs of screws (3mm, 5mm, 6mm, 8mm, 10mm, 12mm and 14mm)
• Includes gold plated terminals quad wire
• 3 pairs of M2.6 threaded holes with 3.5mm distance allows
3overhang positions adjustment
• 12.8g with cables, without screws
AT- LT 13A
13g headshell aluminium die cast body
39
,00 e
Including VAT
EAN 4961310001964
• Includes gold plated terminals quad wire
• 1 pair of 16mm screws and 1 pair of 10mm screws
• 1 pair of M2.6 nuts with plastic washer
AT-HS10SV
10g headshell aluminium die cast body
• Includes terminals quad wire
• 1 pair of 16mm screws and 1 pair of 10mm screws
• 1 pair of M2.6 nuts with plastic washer
AT-HS1
10g dj style cartridge headshell
12
,00 e
Including VAT
EAN 5055145748282
AT-HS6BK
9g headshell aluminium die cast body
black finish
29
,00 e
Including VAT
EAN 4961310147068
AT-HS10BK
10g headshell aluminium die cast body
black finish
29
,00 e
Including VAT
EAN 4961310132026
silver finish
29
,00 e
Including VAT
EAN 4961310132033
• Compatible with AT-LP3, AT-LP2x turntables*
• Includes terminals quad wire
• 1 pair of 16mm screws and 1 pair of 10mm screws
• 1 pair of M2.6 nuts with plastic washer
*On AT-LP2x turntable, the AT-HS3 headshell is an exclusive black finish version.
32,00 e
Including VAT
EAN 491310139414
AT-HS3
11.1g angled shape headshell
for straight tonearm
• Compatible with AT-LPW Series turntables
• Includes terminals quad wire
• 1 pair of 8mm, and 1 pair of 10mm screws
• 1 pair of M2.6 nuts with plastic washer
32,00 e
Including VAT
EA N 4961310147419
AT-HS4
Angled shape headshell
for straight tonearm
Removable headshell for half-inch cartridges with slot type overhang adjustment
Removable headshell for half-inch cartridges and straight tone arms
with slot type overhang adjustment
Removable headshell for half-inch cartridges, M2.6 threaded
• Includes terminals quad wire
• 1 pair of 10mm screws and 1 pair of 8mm screws
• 1 pair of M2.6 nuts with plastic washer
silver finish
29
,00 e
Including VAT
EAN 4961310147075
AT-HS6SV
9g headshell aluminium die cast body