Specification
audio-technica phono cartridges guide - 2019/20 - 13
AT-OC9X Series cartridges made
from 32 Years of cumulated experience
and customer feedback from 12 dierent models
all inspired by the acclaimed AT-OC9.
The next generation of the widely revered AT-OC9 cartridge series has
been developed by Audio-Technica, pioneers of cartridge technology.
The new series features an array of stylus options including: Bonded Elliptical, Nude
Elliptical, Microlinear, Shibata and Special Line Contact .
-
T
he moving coil structure has a wide frequency response and enables the audio
information to be separated into both the left and right channels resulting in an
accurately defined stereo image.
-
P
ure Copper by Ohno Continuous Casting process (PCOCC) is used for the coils to
achieve the purest signal possible.
-
T
hreaded holes in the cartridge body enable the cartridge to be mounted on to the
headshell, or integral tonearm, with just two screws M2.6 – no nuts or bolts required.
-
Features an aluminium cantilever for AT-OC9XEB and AT-OC9XEN models, and boron
cantilever for AT-OC9XML, AT-OC9XSH and AT-OC9XSL.
-
A
neodymium magnet and pure iron yoke (for AT-OC9XEB and AT-OC9XEN) provides
increased magnetic energy.
-
T
he yoke parts of the magnetic structure of the AT-OC9XML, AT-OC9XSH and
AT-OC9XSL uses Permendur, a soft magnetic alloy made of Iron and Cobalt.
-
A
luminium body minimizes unwanted vibration for reduced resonance and a superior
audio reproduction.
AT-OC9XEB AT-OC9XEN AT-OC9XML AT- OC9XSH AT-OC9XSL
The 5 new models of the AT-OC9X series all feature PCOCC internal wiring
and an aluminium body with integrated M2.6 threaded inserts to enable easier mounting.
AT-OC9XML, AT-OC9XSH, AT-OC9XSL also feature
a Permendur Yoke magnetic structure combined with a Boron cantilever.
Screw
Washer