Owner's Manual
AT2020USB+
5
(on back)
2
3
1. Capsule - Condenser microphone element
with
cardioid polar pattern
2. Blue
LED
- Blue light shows microphone is receiving USB
power
3. Headphone Level Control - Dial controls headphone volume
4.
Mix
Control - Blends microphone and pre-recorded audio
5. Headphone Jack -
1/s
-inch (3.5 mm) stereo jack
for
connecting your headphones
6.
Metal
Construction - Tough, durable, resilient design
7. USB Connector - Use the included USB cable
to
connect AT2020USB+
to
your Mac or
PC
8. USB Cable
Setting up your microphone
with
included pivot mount and tripod desk stand
A. Screw the pivot
mount
onto the top
of
the tripod desk stand.
B. Place the tripod desk stand on a flat surface. (The tripod legs will extend
to
provide a wide,
secure base.)
C. Install the AT2020USB+ microphone into
the
threaded collar
of
the
pivot
mount
and tighten
collar while holding the microphone
in
place. The
front
of
the microphone should be facing
the
sound source. (A USB icon and blue
LED
indicate
the
front
of
the microphone; the product model
number is displayed on
the
rear
of
the
microphone.)
D.
If
necessary, adjust the microphone's angle
with
the
pivot
mount's
thumbscrew.
E. Pl
ug
the provided USB cable into the USB digital output at the base
of
the microphone.
Note
: Many recording software programs are available online. Audacity is widely used free software
for
recording and editing sounds.
It
is available online at http://audacity.sourceforge.
net/
4